Hello
I am looking for a part number for the solenoid plug on the outside of the a442f transmission on a 1996 FZJ80R. Or does anybody know the pin connector dimensions to replace the female pin connectors.
I unplugged it to do the manual shifting test as per the manual to diagnose my shifting...
I'm in need of a torque converter for a rebuilt A442F hydraulic tranny that I'm putting in soon. Anyone have a used one? I ordered one from Yoshiparts only to wait 3 weeks and have them tell me it was unavailable and cancelled my order. It looks like the part number is the same for the A440 and...
Hello everyone,
I’m hoping to get some advice or insight on a question related to my 1994 HZJ73, which is equipped with a 24v system. I recently upgraded my valve body with a heavy-duty one from Wholesale Transmissions, and as part of the upgrade, I received new solenoids for No. 1, No. 2, and...
My Landcruiser indicates on the metal plate on bonnet that the transmission is of type A442F.
I would like to know the dry fill capacity of the transmission. I seem to be getting rather confusing transmission dipstick readings after dry fill.
Is the capacity 11.4 liters, 12 liters, 13 liters...
EDIT: The circuit boards for the TCM’s on both the original and the one I swapped in were messed up in different areas. My buddy with a 93 came over and we swapped his TCM in and it fixed my issues.
I bought a 93 FZJ80 equipped with a A442F transmission the other week. The truck had been...
Hey all! I have a 94’ 80 series and have been chasing down an intermittent transmission issue for a while now. For back story, transmission has been serviced by myself previously. Have done 3 trans drain and refills and began having a random gear loss after the last one, no issues before that...
Rebuilt A442F with new converter
Work done by local transmission shop owner with 40 years experience. I have $2000 in it. I’ll take $1500 to IH8mud member or tlca member. Located in central Ohio.
Long time lurker, first time poster here. I have a '94, non-locker bought it a couple years back. I'm looking to put together either an Elite 2500 or the 2000 to control the engine and transmission for a few reasons. I'd like to be able to tune the 1FZ to understand what the milage potential...
Hello mudders,
I am working on developing a trans control harness and tune for my 1993 USDM 80 series so I can use a Haltech standalone ECU. I have been able to successfully map A34x series transmissions in Tacomas and for the most part the A442 (AW450-43LE) looks to function the same really...
Hi, i has a 1996 diesel landcruiser with an a442f that is having transmission issues.
It is going from 1st to 2nd but is like its slipping unless let of throttle slighlty then goes in nicely and doesn slip ( i think its called flaring) and when you go from drive to 2nd it like it goes into...
Pulled from 1994 80 series HDJ80 with 1HDT. A442F Hydromechanical automatic, tcase and torque converter.
We can pair up with the engine as well for a complete drivetrain, or buy just the engine or just the trans/torque/tcase! Being refurbished as we speak!
More pictures to come!
$3500...
Hey guys....
I am new to this so thank you for having me and letting me share. I am having issues with my 80s 1HD-FT with a A442F gearbox i bought six months back as project vehicle thats now giving me so much trouble.
HISTORY: The car was a wreck, no service history and not maintained but i...
Rebuilt A442F from my 93 FZJ80 for sale. All new clutches, new converter. It was rebuilt by my local transmission shop about a year ago. But never installed. Just needs a new breather for the top of the case. Central Ohio. When I get my truck fixed I will drive to state line for asking price...
Hi all,
Just hoping for some input before potentially blowing a lot of $. Late '95 fzj80 with a A442f.
I was driving along at 100kmh when my box Down shifter back to 3rd for no reason. Since then this has developed into not dropping back to 1st at traffic lights and has become so bad that if...
I am going to do the solenoids on my 94 as I’m starting to experience some poor shift behavior.
I know there are the 4 shift solenoids but no one seems to mention the pressure control solenoid. Is I needed as well or only the shift solenoids? Can it be replaced just as easily?
Hey all,
My apologies if there's already a thread. I searched and couldn't find one. Wondering what the standard shift points for a A442F hydro trans for the early (1992) JDM turbodiesel should be shifting at? I have a suspicion mine is shifting wrong. My shift points when left in D is...
As the title says I'm looking for a fully hydraulic A442f gearbox to fir with 1HD-t engine.. Would be optimal if it's fully working or reconditioned unit but non working is also an option.
No need for Tcase.
And also shipping to Finland would be required.