1fze

About three years ago, I took my 96 FZJ80 to a garage inSouthern California for service. On my way there from Norcal, I kept an eye on engine temperature. I always do. The truck ran at 198°F all the time. Even while going up the grapevine. While at the shop, they told me that my radiator was...

I’m trying to locate a bracket and pulley setup for a York style OBA unit. It doesn’t look like anyone state side makes them anymore. Let me know what you got. Thanks.

Got a 91 that sat for 15 years, bringing her back to life slowly and discovered the truck's missing the Vacuum Control Valve, # 90925-03057 (discontinued for many years). Is there compatibility with 1FZE VCV # 90925-03192 with the 3FE? I've searched and found threads, but haven't found a...

From a running 96 with a ticking noise. GOOD OIL PRESSURE, NO OVRRHEATING, STRONG RUNNING. Cylinder head not available. All other external and internal parts are available including oil pans, crank pulley. Harness, complete exhaust with cats and muffler, alternator. Startet. Oil cooler. Front...

So Cal No known issues with oil consumption, knocking or low oil pressure. It had a bad head gasket but owner had a spare engine. Engine has 260,000 miles on it. Cylinder head was removed from engine and machined and is for sale on Mud, ready to install on this engine or another engine...

From a 1994 Machine shop cleaned head and pressure checked for cracks and leaks, checked surface for level, did complete valve job and seals, checked cam shaft bearings and surfaces. Complete head with camshafts and valve clearances set. It came out real nice. $700 firm price with local...

Someone lost the whole set which means after I get the bearing caps I will need to have them line bored, but the head is in great shape - pressure tested and no warpage at all. Please send personal message with price. They can ship in a flat rate USPS mailer.

Pretty nice car in primer, all panels are very straight. Grey interior. Powder coated wheels. Was running great and passed smog, no engine codes. Head gasket failed and water is going directly into one of the cylinders. As of 4-22-20 all parts or entire car is available. This was a daily...

I am in the San Gabriel area, north of the 10 freeway just off Rosemead Blvd. The 96 runs very well and body is good. Nice dash top. Steering wheel needs restoration, Front seats need upholstery. It has current tags and drives well, but the airbag system is out and I do not wish to sell the...

Full part out. Runs real good, shifts very well, T Case works, everything seems good. Brown interior. Nice dash top. Steering wheel is not cracked but leather is worn at the surface. Front seats are shredded. Seat motors are dead. Good bumpers. Air bag system is not working properly and car...

SoCal - Los Angeles area near Pasadena Shipping unlikely unless you want to set it all up and I can put it on a pallet and take to local shipper. 1996 Engine 265K in car, runs good, Compression all cylinders above 180, history unknown. Good Oil pressure, even after one hour of idling. , Come...

SoCal NO SEATS except for 3rd Row which are 40th Anniversary 3rd row seats The Cruiser is not a 4oth anniversary cruiser. It would be genocide to part one out! Car is pretty much complete, Runs and shifts well. Also parting out a 96 and I have many parts from many other Cruisers Please send...

SoCal For 1991-1992, $150 includes shipping For 1993-1994 $150 includes shipping For 1995-1997 $199 includes shipping. From 3FE 91-92 From 1FZE 93-94 (OBD1) From 1FZE 95-97 (OBD2) VSV, etc. Please send private message and include your year. ECUs, AC amplifiers - Anything electronic

SoCal Starters $50 Alternators $50 ECUs - $100 - $125 EGR, VSV, etc etc Please send Personal Message with your year model

SoCal - All parts are from good running engines without CEL light on. Engines have been sold but sold without intake manifolds, sensors etc. PLEASE LET ME KNOW YEAR OF ENGINE I HAVE parts from all years 1991 to 1997 including AC compressors Example: Injectors - 6 for $75, ( pink) EGR -...

SoCal Shipping extra at cost 1991-1992 Pump with pulley $125 (3FE) 1991-1992 High Pressure Steering Hose $75 (3FE) 1993-1997 Pump $85 1993-1997 High Pressure Hose $60 No leaks, squeaks, rumbles or squeals.

SoCal Air Flow Meter for 91-92 (3FE engine) $160 + shipping for 93-94 (1FZE engine) $160 + shipping for 95-97 (1FZE engine) $100 + shipping None of these meters have been opened or tampered with and came off engines that ran good. Air Flow Meter Intake...

One of the sweetest running engines I have ever seen. No overheating problems, and good oil pressure. Engine is still in the car so you can test it yourself. Car is fully driveable. Miles on the car show 250K, however an old engine does not purr like this one. 1997 engine can be used in...

SoCal NO SHIPPING Please come to test the engine yourself, or send a mechanic. Runs good with 220,000 miles on it, valve job done a couple years ago. It is still in the car so you can test the engine. Compression check was run on 10/24/2017. All cylinders at 150 or higher, however the oil is...