fj80toyman
...One Landcruiser at a time
These are take-offs. Nearly new. Inlclude centers and lugnuts. $100 for 4. Don't care to ship but I will if you pay cost. Will deliver in or near L.A. Ca. PM for pics, will try to post later.
'04 Tacoma Silver Steel Wheels 16x7
- Thread starter fj80toyman
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Do they fit the FZJ80? I might be interested since I am in LA quite often.
fj80toyman
...One Landcruiser at a time
- Thread starter
- #3
I'll check to see if they'll fit. I can only compare to the stock wheels from my '80 for backspacing.
The steel wheels on the '80 (very rare) were 16x8. These are 16x7. However if backspacing is the same, I think they'd fit. The centers likely won't fit as the Tacoma didn't have full floaters and the '80 does. The bolt pattern and center diameter should be the same.
The steel wheels on the '80 (very rare) were 16x8. These are 16x7. However if backspacing is the same, I think they'd fit. The centers likely won't fit as the Tacoma didn't have full floaters and the '80 does. The bolt pattern and center diameter should be the same.
fj80toyman
...One Landcruiser at a time
- Thread starter
- #4
Here are some pics
These are in very good condition and include all lugnuts and centers. 16x7 6 lug
These are in very good condition and include all lugnuts and centers. 16x7 6 lug
Last edited:
I'm interested. PM'd you.
Mike S
Mike S
Last edited:
fj80toyman
...One Landcruiser at a time
- Thread starter
- #7
Alright, here's some pics from today. I fit them to the rear of the 95 '80 and they fit just fine. Both the OEM alloy wheels and these 16x7's have 4.5 inch backspacing, the steel wheels are just 1" narrower from the outside to the mounting surface of the brake.
There's no interference with anything, brakes and all. I expected this but wouldn't feel right about it unless I actually checked it. See photos. The first pic is the wheel mounted against the rotor, plenty of room to the wheel cylinder. The second photo is the 16x7 wheel next to the OE alloy wheel lined up at the front edge.
Any interest? Dan.
There's no interference with anything, brakes and all. I expected this but wouldn't feel right about it unless I actually checked it. See photos. The first pic is the wheel mounted against the rotor, plenty of room to the wheel cylinder. The second photo is the 16x7 wheel next to the OE alloy wheel lined up at the front edge.
Any interest? Dan.
Last edited:
I'll take it if you still have it. I work by UCLA. Thanks!
fj80toyman
...One Landcruiser at a time
- Thread starter
- #10
Steel Wheels - buyer backed out, still for sale
These are still available. Price hasn't changed, these are nearly new rims with all the jewelry. I will ship if I have to, will personally deliver to So. Ca. locations.
Dan.
These are still available. Price hasn't changed, these are nearly new rims with all the jewelry. I will ship if I have to, will personally deliver to So. Ca. locations.
Dan.
If someone with an 80 buys these,
Please post up pictures once they are mounted with tires and put on the truck.
Please post up pictures once they are mounted with tires and put on the truck.
Does anyone know if these will fit an HJ61?
I test mounted these the other day on my sixty. They cleared the caliper easily but just barely kissed the steering arm (stock steering). you could turn the rim but you could feel it scraping.
View attachment 68845
View attachment 68846
View attachment 68847
Matt
View attachment 68845
View attachment 68846
View attachment 68847
Matt
Last edited:
