Search results for query: *

Forum search Google search

  1. K

    OME vs HFS vs redlinecruisers

    It sounds like the bilstein shocks are the way to go regardless of the springs, and if you were to go and buy a kit off the shelf dobinsons would be best ride? The redline cruiser kit seems to tick the boxes of comfort, bilstein, and all around best ride if it’s using all the best components...
  2. K

    OME vs HFS vs redlinecruisers

    Has anyone had the redline cruisers ultimate lift kit installed on an FJ40? If so how is it? That claim that it’s a great ride, and include the bilstein shocks in the kit, which seems to be the shocks people switch to regardless if they have OME or other lifts. I’ve read a lot on here about...
  3. K

    Does anyone make mounts to go onto the windshield hings of a 40 for lgihts?

    I looked on your website and couldnt find light mount brackets. Any availible?
  4. K

    Removing pulley from 77 fj40

    Smog pump went bad and had to order a new one
  5. K

    Removing pulley from 77 fj40

    The nut is loose but is being held down by something, I will see if there is a tab
  6. K

    Removing pulley from 77 fj40

    How do you get the pulley off of a 77 fj40 smog pump?
  7. K

    fj40 engine bay noise

    the smog pump is the issue, took the belt off and the noise was gone. any ideas of where to find one for a 1977 fj40?
  8. K

    fj40 engine bay noise

    it seems like the sounds is from the smog pump, we tightened the belt and its not as loud but sounds like its "sucking" air
  9. K

    fj40 engine bay noise

    its odd that its not constant. cant see any rattling, bearings? lube?
  10. K

    fj40 engine bay noise

    will check again though
  11. K

    fj40 engine bay noise

    no there is not, first place we looked
  12. K

    fj40 engine bay noise

    while driving today, this noise started. Any ideas? sounds like a pully. here is a link to a video of it. New video by Kyle Pruitt - https://photos.app.goo.gl/6Cs4HMPUPPAWMU1s7
  13. K

    The FJ Company - 1977 FJ40 Restoration

    fj company, where did you find that fan in the corner of the engine pay pointing into the air cleaner? Can’t seem to find one anywhere
  14. K

    ‘77 fj40 oil issues

    Here’s a quick update. we redid the vacuum hoses and that alone has made a huge difference. There used to be a smoke around the fj while idling and now that is no longer a problem. The idle is also much smoother. We out in a new pcv valve and new spark plugs and all is good so far. We still...
  15. K

    Fj40 fender bolt kit help

    I have a bolt kit fit a 1977 fj40 from cool cruisers and was curious if anyone knows a diagram of how to know which bolt goes where or knows of a thread of a breakdown of installation? Thanks!
  16. K

    ‘77 fj40 oil issues

    The fj runs and starts beautifully. The previous owner did a nice job of going through the motor and the valve stems should be an easy fix and will update the post with results
  17. K

    ‘77 fj40 oil issues

    Do you ha s a link for some cable stem seals? Think the previous owner had the head redone.
  18. K

    ‘77 fj40 oil issues

    In the picture where the silver piece goes into the top of the motor there is some oil that sits there as well, should I tighten that down in more? And also what do you think would be on the fender?
  19. K

    ‘77 fj40 oil issues

    Today after checking the oil, the oil was barely on the dipstick. There are no drips on the concrete floor of the garage and has not been driven very long since previous oil change. There is some smoke on idle but seems to go away when driving. But we have not followed at night to see if there...
  20. K

    Aluminum tubs

    In everyone’s opinion, what do you all think putting an aluminum tub on an fj40 does to the value of a restored fj?
Back
Top Bottom