I have a buddy that has the suspension, and yes you can run 35's with no problem, his rub a bit in the back but it is due to the backspacing of his wheels (or lack thereof). I think it makes the 60 wagons look tipsy, but that is just me. I saw his next to one with the 3" lift with 33's and i'll...
Hey Christo, can you fab something up for the front of the 60 that doesn't look as gawdy as the ARB but still has winch capability? Not to diss the ARB but since the change in style, they just look....odd, I wish there were more 60 PTO winch bumpers out there that are OEM but alas there isn't...
So it is possible to do this w/o taking the springs from the shackles? Do the springs curve once weight is taken off of them? The AALs are waaay more arched than the OEM springs on there. Also once you heat the spring retainers(?) do they just come apart? This is my temp solution for lift until...
Ok, so the AAL kit arrived yesterday, wow do those springs look arched!! I am still waiting on the U Bolt kit from JTO, but I am trying to get some direction as to what others have done to install them. I have heard to not remove the springs from the shackles, rather undo the u bolts and remove...
The other day some friends and I were negotiating a couple of hills that required some crawling to get up (25 degree + slope according to my inclinometer) and as soon as I had engaged it into 4 low it acted ok until one of the wheels began to spin and started making this horrid grinding noise...
Does anyone know if procomp rock crawler wheels 15x8 with 3.5 backspacing will fit and clear the calipers ok, and if they will clear 4runner calipers when I get them.....
Any info would be greatly appreciated...
Sweet, i'll have to contact JimC. I pulled the old pump apart and I guess the bearing just seized up, it had been squealing but I thought mistakenly that it was just belt squeal. When I pulled the thing apart it looks kind of like a magneto or something on the inside, but there is no place to...
I have looked and searched but have not found any great descriptions on how to devane the smog pump. If anyone could share with me I would appreciate it. The pulley on mine sheared off the other day and I had to remove it and order one from cruiserparts.net, I am wanting to devane it as the...
Anyone else know where to get a heavy duty rear sway bar for the 60? Apparently MAF was out of stock when I placed the order for mine. I would rather have one of theirs as opposed to the FJ62 one, but if that be the case then I will try one out. If anyone knows of anywhere else, or if you just...
Ok, I have searched on the threads and have not been able to find out what the stock wheel size for the FJ 60 is? I know my old 80 was 16x8, most others are 15x7 and currently I have 15x10's with 31x10.50 15's. As they are they are bulgy (?) and I wanted to find something that fit a tad better...
Ok, so I have this 60 that I have had for about a month or so, I have fixed some minor things, but the big things (carb rebuild etc..) are coming up. What the PO did was remove the EGR valve and blocked off the connection. The air pump is a little squeaky, but is not connected to anything. The...
Ok, so I decided to try the A/C compressor to see if it works (belt was missing when I purchased it) The thing blows cold air, but every minute or so when idling the engine will rev up to 1500 rpm's and down to idle and continue this cycle several times then quit. What is this? Surely this is...