Search results for query: *

Forum search Google search

  1. Rocky_LC

    Need Oil Pan and Gasket... Best Source?

    Thanks, All - I'll probably have to pull off the pan and try and weld it up. It's really leaking pretty good. It's crazy - I just changed the oil, and all of a sudden, its dripping out like crazy. My local dealership (Desert Toyota) is really high on their pricing, but, I'll see what they...
  2. Rocky_LC

    Need Oil Pan and Gasket... Best Source?

    I have a FJ40 with a '85 FJ60 2F Engine Swap. Oil pan is leaking under the "bash plate" - probably from one of the welds. Any recommendations on parts vendors with good prices and reasonable shipping? I found this - seems fairly recent. Can anyone confirm the part number for the pan and...
  3. Rocky_LC

    Two Quick Questions for you Emissions "Smart Guys"

    Found the vacuum line and check valve off the intake manifold. It goes to the outside diaphragm of my distributor. Easy hook-up. Thanks, all for the support! Rocky
  4. Rocky_LC

    Two Quick Questions for you Emissions "Smart Guys"

    Thanks, Gretsch - I need to look at that. I agree with you - it sure looks like if that port isn't hooked up, I won't get HAC advance. Thanks - Rocky
  5. Rocky_LC

    Two Quick Questions for you Emissions "Smart Guys"

    Thanks for the manual. I hadn’t considered the BVSVs might be “opposite polarity”.... normally open vs. normally closed. I’ll have to do some reading here soon. Thanks again - Rocky
  6. Rocky_LC

    Two Quick Questions for you Emissions "Smart Guys"

    I have an '85 2F transplanted into my FJ-40. Much of the emissions stuff has been retained IAW guidance from this Forum. I had two quick questions: 1. What is the purpose of the lower port on the HAC Valve (Not the big one, which I understand should be open to the air...). Should it be...
  7. Rocky_LC

    FAQ 60-series FAQ

    Tie Rod & Drag Link Information... Graciously provided by Kurt at Cruiser Outfitters... (Not trying to advertise one business over another - This is just helpful information). Tie Rod Thread Diameter and Pitch: 23x1.50mm Drag Link Thread Diameter and Pitch: 21x1.50mm We do have the taps...
  8. Rocky_LC

    Can Someone Post Up A Pic of the Rubber Dist. Cover Installed?

    It's supposed to keep splashing water / slush off your wiring. When I searched, the consensus among many was that the cover wasn't really necessary (as the big cap distributors are well designed, and well sealed), but I have the cover, so I figured I might as well install it. You know, to...
  9. Rocky_LC

    Can Someone Post Up A Pic of the Rubber Dist. Cover Installed?

    Thanks for the quick reply. After thinking about it, those cutouts in the bottom of the rubber matched the bumps on the cap above the bottom rim. Regards - Rocky
  10. Rocky_LC

    Can Someone Post Up A Pic of the Rubber Dist. Cover Installed?

    Rubber Dist. Cover Installed - Never Mind Sorry - I figured it out. No picture requried. It does above the rim of the cap. I tried to delete this thread, but couldn't figure out how to do that either...! Original Question.... I can't get my cover to fit right (at all). I am...
  11. Rocky_LC

    Side-Side Play in FJ-60 PS Box

    Thanks for the info - especially the tip on adjustment of the PS Box. I noticed that screw / nut on top of the box, but never thought it might be an adjustment, or it was a user adjustable setting. I'm not sure about the TRE preload - I'll do some searching on that. Thanks again. Rocky
  12. Rocky_LC

    Side-Side Play in FJ-60 PS Box

    I've got an FJ-60 PS Box, installed as a PS conversion in my FJ-40. I had a bit of "death wobble" which was traced to loose U-Bolt Plates. This was corrected. I have a new Tie Rod / Relay Rod, and new TREs. Steering Box is tight on the frame. 4" Lift 4 Deg Caster Sims Installed*...
  13. Rocky_LC

    How to remove axle- welded spider

    Did he do it like this guy? Welded Dif, What the hell!!! - Pirate4x4.Com Bulletin Board
  14. Rocky_LC

    Emissions computer removal

    I believe on a desmog, the only thing that this would affect is an idle cut in cases of high vacuum / high RPM (i.e. idling downhill). I think that's what I read in this thread, anyway..... https://forum.ih8mud.com/60-series-wagons/188643-my-desmog-thread.html Maybe JimC will chime in. I...
  15. Rocky_LC

    New fj60 for me for me for me

    The black thing is a distributor cover (anti-spalsh). You will eventually want to put it over your distributor again, so you can go fishing (from your truck) in deep water. Good Luck Rocky
  16. Rocky_LC

    Moving to AZ

    I have a '74 FJ-40 (in Tucson, Pima County) and all I have to do is pass the gas tank cap check and the tailpipe test. They don't look under the hood..... (One day they may, though). Rocky
  17. Rocky_LC

    '84 FJ60 RE-Smog

    I included the smog pump with all the stuff, (but looking back, i should have kept that). I am running a devaned '77 smog pump I had laying around. Here's pix of what I sold (OBTW - I guess I only got $150 for it...) https://forum.ih8mud.com/sale-parts/332366-smog-parts-85-fj-60-2f.html...
  18. Rocky_LC

    '84 FJ60 RE-Smog

    I just sold a complete set of smog stuff from a '85 for ~200. Maybe it might cost more depending on how desperate you are.' There have been a bunch of FJ-60's in the C4C program - check in the "Parting Out" section. I'd be careful on this one - the rules in CA (I believe) say that if the...
  19. Rocky_LC

    TRE advice needed: Replacement options for 60 series TRE

    The threads are different between the 60 Series Tie Rod and Drag Link. The thread is: Tie Rod: M23x1.5 Drag Link: M21x1.5 I am trying to line up a tap to attempt to rethread the "standard side" as I cut down a set for my FJ-60 steering install on an FJ-40. Thanks ROcky
  20. Rocky_LC

    Temp Sending Unit?

    See post 15 of the attached FJ-40 thread - there is a discussion of the adjustment screw and how the whole guage system works... https://forum.ih8mud.com/40-55-series-tech/170755-fuel-temp-gauges.html
Back
Top Bottom