Anyone have a link to a decent discussion on Motion X?
I swear I'm not usually tech simple, but for the life of me I can't figure out how to use an offline downloaded map.
I can download a map, apparently successfully, but cannot come up with a good way to test it. If I disable the wifi and...
No luck on searching, here or on the rest of the interwebs.
How many washers and bushings go on the top of traditional shocks? For this purpose I'm pretty sure OME and OEM are the same. The other question is are all four corners the same?
From the top,
1. Upper Nut
2. Flat Washer
3...
Small leak of PS fluid, so with some extra time today I decide to get under there and take a look.
It appeared that when I installed my new rack a few months ago, I didn't tighten the steering line bolt enough. I mean the one that has a separate "banjo style" bolt, not the one where the bolt is...
Timing belt replacement photographs from ppressle
Timing belt and starter contacts from spressomon
Timing belt replacement write up from scottm
90k parts list
This thread is intended to supplement the 4 incredibly useful threads above. Since you really can't do better than @scottm's thread for...
4 Bilstein stock ride height 100 series shocks.
On truck for ~ 6months
Very minor evidence of use, no serious marks
No offroad use/no gravel etc
includes all bushings and top nut for all 4 (uses stock lower bolts)
part #s:
24-027397 (front)
24-027403 (rear)
$200 to a 'mud member, local...
Electrical geniuses, I have a challenge for you.
I considered moving my turn signal to the corner bulbs next to the headlights. For those who are unaware, the LX turn signal shares the fog light housing on the bumper. So, a while back I just clipped and switched the wires. Worked ok, had the...
I'm flushing my brake fluid. For probably the first time ever. In fact, after looking at the old fluid its amazing my brakes work at all. I see a master cylinder rebuild in my future...
More urgently, I attempted to switch my factory bleeders with speed bleeders. Great idea right? Wrong...
FSM procedure is not complicated, drain the coolant, rinse, refill.
Forgive the dumb question, but after you refill it you're supposed to burp the system by opening the "heater water valve". Anyone have a diagram that shows where this is? I'll take a good description or a picture.
Or maybe...
Feel free to chastise me if the answer to this is in FAQ or searchable, but I was not able to find it.
On a 98 LX, with AHC removed and an OME Medium lift, will shocks that are sized for a stock 98 cruiser fit?
The challenge is that one of my front shocks is worn out, and I would like to...
My 98 runs amazingly well for having over 250K on the clock. While it is relegated to mostly mall crawling these days, over its life it has not been babied. A decade and a half of Texas summers and South Dakota winters were taking their toll on the paint. Oxidation was showing on the hood and...
I'm going to be bedlining my 100 series. There's 267K miles on it, it lives outside in Dallas, and my clear coat is oxidizing/flaking.
After a foray into the wrap world, I've decided that bedliner is the way to go.
I'm fairly familiar with the bed liner options out there, but there's one...
Yall:
I have a set of running boards off my 98 LX. Free, but I have no interest in shipping.
So be local, or know someone local to Dallas/Ft. Worth and they are yours.
I would love to hear some theories on this one.
Problem: a squeak coming from the front end.
When it occurs: only when its hot (90deg F+), and only over small bumps (expansion joints, small imperfections in the road, etc)
When it doesn't occur: over larger bumps (speedbumps), or on flat...
CO land cruisers:
Greetings, I'll be visiting my Father-In-Law's home in Crested Butte around 4th of July.
I'll be doing some extremely light and tame wheeling (new baby will likely be in the car), and Paradise Divide will probably be the most aggressive road I travel.
What's the deal with OHV...
I searched, googled, looked in the service manual. Maybe no one does this, or it's so obvious to the average person that it doesn't need to be written down.
But, how do you pop out the vent louvres on the rear pillars? They are the plastic pieces in the body, about a foot above your...
For the CV boot experts:
I am having my CV joints replaced for the second time in 3 years. (No time to do it myself, and if I'm being honest questionable expertise as well). This time, I finally noticed that both boots on both axles are significantly loose from the axles. One is just leaking...
Anyone replacing a broken headlight? I will take the old one off your hands. I need the housing only, no need for glass. Both sides if possible, but I'll take either!
I would love a push in the right direction here.
There is a slight "loose" feeling in my left front wheel, started just today. It almost feels like a bolt connecting suspension components has worked its way almost out, or that my bearings are toast.
After a visual inspection, and the...
*****Edited, sold******
Never Used, just stored Pull Pal RW 11000
Meant for GVW 6,000lbs and under.
The blade measures 10”x24” and the rest of the assembly is 45” long. Weighs about 35lbs.
There are some small rust spots here and there. Nothing that is anywhere near structural...