I sent an email off to Gturbo a couple of weeks ago and Rhys Bentink responded fairly quickly.
I had bought a red wheel for my 1HD FTE from them and an intercooler from PDI. There's a mounting hole in the bottom of the intercooler to mount a NPT elbow to take a pressure reading. They suggested...
I"m interested in any feed back on the removal or modification on the pre heater in the crossover pipe to inlet manifold and the removal of the EGR valve. The objective is to reduce restriction while still giving the appearance of stock.
I've seen people pull the heater element out of the alloy...
The exhaust manifold on the 1HD-FTE is actually a two piece item. Sealing the two are a mixture of clips, o rings and a collar. Are these serviceable items? If you remove the manifold for whatever reason, should these parts be replaced?
Looking to hear from those that can talk about the air flow characters of both.
Ive just put a high flowing turbo and air box on my 1HD-FTE, now looking for a suitable snorkel that can flow a decent amount of air.
Anyone have an opinion?
Experts,
When I sit in the drivers seat (RHD), and I change gears, as soon as I put my foot on the clutch I can hear a tik, tik, tik noise on the left side of the engine. It seems to coinside with RPM and engine load. When under load there is no noise. Put the foot on clutch and load is stopped...
Plenty of talk about EGT's / pre turbo and post turbo........
I have a 1HD-FTE engine and I want to put the EGT probe on the exit of the exhaust manifold or in the opening of the turbo collector. Does anyone have any pics or info on where the best location is, given that the turbo has to come...
Has anyone got any experience in the complete removal of the inlet "meter run" on a 1HD-FTE. This entails the EGR butterfly valve and heater set up as per the attached pics.
Does this cause any fault codes to be generated? Does the ECU cause the engine to run in a "detuned" manner?
Im sure...
OK, I have a 2006 Land cruiser with a 1HD-FTE engine. The 5 speed box is a H151F. There is about a 200 RPM difference between 4th and 5th gear. As I understand it, the 5th gear from the 2014 VDJ box is a direct change over into the H151F box giving a 500 RPM difference between 4th and 5th.
Does...
I'm sure someone has covered this in a thread somewhere, I just haven't been able to find it.
As I understand it, the 06 HDJ100R has a semi floating diff. Can this be removed and have a full float diff from a 105 installed in its place without to much modification, if any? I do know there is...
Looked on the part number thread but has not been listed.
Can anyone supply the part number for a nippon denso starter motor for a 24v 12HT engine. Should be something like 28100-????
Thanks for your help
Does anyone have any idea where the ignition relay is on a 24v 12ht engine?
I have an intermittent fault with the starter/ignition/relay. The engine still cranks when the engine starts and when it’s switched off with the key removed.....
Any suggestions would help.
Justin
I'm having an epic drama locating the Denso model number for a 24v alt on a HJ61 12HT. Can anyone help?:)
The plate is still on mine but faded with a few extra dents and unreadable, even with the specs on.
Cheers
My glow plug light does not come on when the ignition switch is turned on. I've checked the globe and its fine, so are the fuses. I've been waiting for 15sec before I turn the engine on and it seems to start fine but the light should come on. Any ideas where I should be looking to track down the...
My glow plug light does not come on when the ignition switch is turned on. I've checked the globe and its fine, so are the fuses. I've been waiting for 15sec before I turn the engine on and it seems to start fine but the light should come on. Any ideas where I should be looking to track down the...