Search results for query: *

Forum search Google search

  1. 4

    Easy fix for leaking rear a/c lines

    Does anyone know of a kit that instead of cutting the lines and capping them, you instead just screw off the old line and screw a new cap into it's place? I'm referring to the small 5/16 lines, not the big 3/4 line. As you'll see in the picture, the idea would be to avoid using the red cap and...
  2. 4

    Rear wheel well rust - Looking for replacement panel

    Hello all, I have an '01 LC100 with rust on the passenger side rear wheel well, directly behind the bottom of the door. Does anyone know where I can purchase a panel? OR, does anyone know someone parting out a LC that would be willing to cut this panel out? Most importantly, anyone repaired...
  3. 4

    HF12K winch for my LC100

    If this isn't the right place, feel free to move it. I'm posting it here since I just picked up a '00 LC100, I need a winch for it, and this'll chronicle me wiring it up, building a mount for it, possibly building a new bumper, or just figuring out how to hide it behind the stock bumper...
  4. 4

    Fuel Pressure Regulator or Fuel Pump

    What do you guys think of this? I'm thinking it has to be one or the other and I think I'm leaning more towards the fuel pump. (although I'm hopeful but doubtful it's just a fuel filter) Symptoms: A couple weeks ago, the truck (96 FJZ80) started dying suddenly. We'd be driving along at varying...
  5. 4

    Wanted  95-97 PS Front Door Handle

    My handle broke off and I need a new one, can anyone help? Please send PM with price and handle color for shipping to 20189. Thanks!
  6. 4

    Inexpensive Ebay Type 194 LED's

    Saw these inexpensive Type 194 LED’s on Ebay and thought I’d try them out. It appears that shipping will take up to 3 weeks (no fault of shipper since my packages are forwarded from US to Africa) so I’ll do a write-up once they arrive and are installed. My main reason for going this route is...
  7. 4

    Know a good machine shop?

    I'm finishing up my rear swing out carrier for the FZJ80 and need a machine shop that can slightly bore out the tube that fits over the spindle. It's about a 5 minute job at most and pretty straightforward. Before I pay just anybody, can anyone recommended any shops that are Cruiser friendly...
  8. 4

    FS: 94-97 Transmission/Belly Skid Plate

    These 3/16" skid plates have already been cut and drilled to mount on a 96 but I'm told that 94-97 should all be the same. These were cut with my torch so they don't have plasma smooth edges but 10 minutes with a grinder and you'll be good to go. I'm selling them cheap at $150 just to cover the...
  9. 4

    Swap Plasma Cutter use for ?

    Hi there, I'm new to the area and need to cut some brackets for my sliders. Since I'll be leaving the area for overseas in a couple months, it doesn't make much sense for me to purchase a plasma for a single job and then have it sit in storage for the next 3 years. So, this is what I propose...
  10. 4

    Removing the Catalytic Converters

    I'm moving to Africa (Ethiopia) and need to remove the cats due to leaded fuel. I'm thinking I may go the Magnaflow route except add flanges so I can unbolt and replace as needed. This way, I can run the stock cats until they die, then swap in the Magnaflow. It's just a 2 year gig so hopefully I...
  11. 4

    1994-1997 FJZ80 Transmission Belly Skid Plates

    These 3/16" skid plates have already been cut and drilled to mount on a 96 but I'm told that 94-97 should all be the same. These were cut with my torch so they don't have plasma smooth edges but 10 minutes with a grinder and you'll be good to go. I'm selling them cheap at $150 just to cover the...
  12. 4

    Transfer Case Skidplate

    Tonight I found the time to put in some work on my transfer case skidplate, although I still have a bit more work to finish it. For my skidplate, I was looking to build something that gave me both bottom and side protection, and was tied into the frame so that it wouldn't bend or smack the...
  13. 4

    Rear Rocker/Corner Protection Project

    Alright, so I don't post up many of my projects but I thought this would be a good time to start. My goal for my LC is to be able to take it more or less wherever I want and not have to worry about body or frame damage. Along those lines, I made a tranny skid plate, a Tcase skid plate, sliders...
  14. 4

    School me on APRS

    Okay, I think I have APRS down, but feel free to explain it in 1st grade terms just in case I don't. From what I gather, I can get a TinyTrak, configure it using a null-modem cable to my computer, then disconnect, hook it up to my GPS, and run a cable to my handheld. From that point, the GPS...
  15. 4

    Just getting started in Ham w/ a Yeasu 8900

    Hi there, Just getting started in Ham radio and have a Yaesu 8900 w/Comet UHV4 antenna on the way that I plan to mount in the 80. I haven't decided on a mount yet, I'm thinking either the Diamond K400 that so many others swear by or maybe a magnetic. A couple questions for you Elmers out...
  16. 4

    Wanted  WTB '96 FJ80 Lower Control Arms

    Must be straight. I bent one of mine and plan to reinforce and replace both sides. Located in Laredo, TX.
  17. 4

    '97 80 Transmission Skid/Belly Plate

    Transmission skid/belly plate that goes from frame rail to frame rail and is secured to the frame and cross member using factory holes (does not replace the factory cross member)No drilling necessary, just bolt it up and go. Made of 3/8" steel and trail tested. Will come with a fresh coat of...
  18. 4

    Auxillary Gas Tank Different Approach

    Well, I finished off my tranny skid plate, Tcase skid plate, hidden winch mount, and rear corner protectors, now I'm looking to start working on my sliders and possibly an auxillary gas tank. Since I'm building a bumper spare tire mount and have already removed the old spare tire carrier, I was...
  19. 4

    Wanted  96 FZJ80 Lower Control Arms

    As an added bonus, if you have 2 sets laying around, I'll plate your existing set for free. The backstory is that I slightly bent one of mine in the rocks and need a "true" set so I can weld angle iron and strengthen them up. If you're nice enough to send me a pair, I'll also weld up your...
  20. 4

    Metal Bumper End Caps

    I was thinking about fabbing a new rear bumper but my main problem lies in just the plastic end caps. What's the cons to fabbing metal end caps and leaving the center part of the bumper alone? With some stout reinforcement, that should protect the rear quarter and also allow a swing away mount...
Back
Top Bottom