In the market for a 200 series, looking for something very well maintained and clean. Closer to stock than huge is preferred but some mods are fine.
Seems like the 100k mile range around $40k price range is the general ballpark but willing to adjust for the right truck. I'm very picky about...
I had my battery disconnected for a bit and after I connected it back up I adjusted the tps to make sure it was in spec and when I fired it up I was going to adjust my timing up a little, but I can't get it off of 11 degrees timing at idle. It showed 3 degrees at idle prior, but no matter...
Tried to find the part number for this thing but I guess I suck. Any help from anyone? The threads I have seen referencing it have the same unanswered question.
Does anyone know how to calculate the change in compression with a certain change in gasket thickness. I believe I have read the stock gasket is around .052in thick. If I have .01in milled off my head and .008in decked off the block, and I use a oem gasket, is there a way to calc the new ratio...
Not mine. This 80 looks great, and shows to be triple locked based on the switch in the pictures, but the truck does not actually have lockers. Switch is display only.
https://denver.craigslist.org/cto/d/el-paso-land-cruiser-96-lexus-lx-series/6951064844.html
I broke off the little plastic retainer that hooks the lever to the door handle on the inside of the door. Pics below. Anyone have a reference for this part?
I bought a 40 a couple of years ago and it had a lot of work already done to it, including a 4 wheel disc brake conversion.
I noticed shortly after buying it, that if I stomp on the brakes like an emergency situation, I get a bit of a feeling almost like ABS for a split second, and the braking...
Ever since I got my 80 it has had steering and vibration problems associated with the 4" lift the prior owner installed. Just got it back from another shop cause I clearly don't know what to fix myself, and while some of the issues like the vibrations were resolved, the vagueness and the...
**SOLD**
Howdy all, we are selling our 2000 Land Cruiser that my wife has used as her daily driver up until about 6 months ago. We purchased it in Florida back in 2015 at 187k miles, then took it up to Cleveland for all of about 3 months, and been in the Denver area since 2016.
The truck has...
Hello all,
I've decided to tackle an engine rebuild for my wife's 96 LX450 over this winter, which means I'll be asking all kinds of dumb questions from the mud collective since I've never torn into the internals of an engine before. My typical MO would be to just start tearing everything down...
I'm not sure if there is a difference in color for the land cruiser vs lx450, but would love to get a dash grab bar that would match my tan 96 lx450 if it exists.
Does anyone know if getting E46 seats with airbags is a deal breaker or perhaps know which models have them and which don't? I'm looking at a pair of seats I'd like to pick up but the seller doesn't know if it has air bags and I don't know if that matters. My main concern is that I'll be...
Hello, I have an fj62 with 4runner calipers up front. Lost the top bolt tonight, along with the washer. Does anyone happen to know the part numbers for the bolts/washers? It looks like the bolt pn is 90101-12060 but can't find anything on the washers.
I bought a 96 lx450 from a member here that had installed a 4" lift, J springs in front. The truck has always had a very slight driveline noise that would happen rarely with slight acceleration/decel that I attributed to the lift and stock driveshaft being somewhat incompatible.
I recently did...