Search results for query: *

  • Users: LSUfj
  • Content: Threads
  • Order by date

Forum search Google search

  1. LSUfj

    100 series windshield recommendation

    I had the windshield replaced last week and suspect the trim wasn’t installed correctly based on new wind noise. Any recommendations for installers in the Fort Worth/west side area?
  2. LSUfj

    SOLD  Ft Worth TX - 2017 LC Silver Terra 92k mi

    2017 - clean carfax. Was certified when I purchased (see below for more info). I’ve owned it for a little over two years. It had the broken recirc door when I bought it, repaired by Toyota under certified warranty. No other issues. Will include some parts that I never got around to installing...
  3. LSUfj

    Additional wire at OBD2

    I’m new to the 200 series and just picked up a 2017. I though it was odd that there was a wire hanging down, but it was clearly part of the OBD2, so I thought it just needed to be secured. Yesterday I looked at it a bit more and it looks like a pigtail plugged into the OEM OBD2 port with a...
  4. LSUfj

    Wanted  2016/17 LC most colors/terra interior

    Looking for something under 80kmiles, any color but brandy wine. No rust belt trucks. Black interior is ok if the price is right. Budget is around $50k.
  5. LSUfj

    Starter/coil connections for 75

    I’m trying to refurbish by wiring harness and need some help identifying the connector types for the wires at the starter and the coil. Below are the pictures. First are the wires at the starter, two already have connectors. The red wire, I think, goes to the coil +. Does it just get a ring...
  6. LSUfj

    craigslist  93 FZJ80 3x locked - TX

    SOLD! Considering the sale of my 80. Its listed locally at the link below. Asking $11,800 OBO and not currently interested in trades. PM with any questions. 1993 Land Cruiser with Lockers
  7. LSUfj

    1fz head - machine shop

    Anyone know a good machine shop on the west side that is familiar with the 1fz? Plan to start a head gasket job this weekend. I had Dadja's diagnose it for me, unfortunately I cant afford to pay someone do it right now. This was my first trip over there and the quoted price was reasonable, just...
  8. LSUfj

    Coolant leak with heater valve closed

    About a month ago I bypassed the rear heater because of a suspected leak. It didn't leak for about 2 or 3 weeks. We'll the leak is back. It's clearly coming from the heater valve area, but all the hoses are dry. Leak comes down the passenger side of the transmission and often drops as far back...
  9. LSUfj

    Wet O2 sensors

    My 93 started to have a horribly rough idle and some searching showed others that had issues after water crossings or in heavy rain. My sensors are new OEM, so I thought it was something else. Well, I gave them a once over anyway and it turns out the condensate from the AC evaporator was...
  10. LSUfj

    A442F lockup solenoid issue?

    I've got an issue that started about 3 months ago that I cant track down. I'll try to describe it: This is primarily noticeable in OD or 3rd when driving over 50mph. When I start to decelerate and throttle is very light, it feels like the transmission is jumping rapidly between gears. I dont...
  11. LSUfj

    Auto antenna up?

    I used to have a 100 series and whenever you turned on the radio, the antenna went up to the last position. My 80's antenna works, but is completely manual with the buttons on the dash. Should it go up automatically? I have the OEM radio (tape deck only) with 5 speakers.
  12. LSUfj

    Another starter clicking

    I've read just about every thread related to this issue, so I know this is an old topic. Hoping to get some experienced advice. History: This began when I started to work on fixing the A/C on my 93. I replaced the condenser, evap, expansion valve and drier. I know this shouldnt be related...
  13. LSUfj

    75 transfer case rebuild question

    I am in the process of finishing up a rebuild on my OEM case from 2/75. I got the rebuild kit from Kurt at Cruiser Outfitters and he suggested that the bearing that goes on the transmission shaft at the back of the case may or may not fit since there are multiple variations of bearings in this...
  14. LSUfj

    Addition of ABS

    I have a 93 that came without ABS, but recently installed front and rear axles with lockers. So I have all four wheel sensors and wiring harnesses for both axles. It looks like most of the ABS parts are available used on EBay and I also have a local scrap yard with a pretty complete 94. The...
  15. LSUfj

    For Sale  FZJ80 non-locker axles, Fort Worth TX

    I swapped in locking axles and don't really have room to keep these. The rear is a semi float with drum brakes and the front has early rotors and calipers like an fj80. Rear was in good shape when removed, no issues. Front needs a knuckle service and possibly a driver birf. Both are stock out of...
  16. LSUfj

    93 fzj80 front and rear non-locking axles

    I swapped in locking axles and don't really have room to keep these. The rear is a semi float with drum brakes and the front has early hubs and brakes like an fj80. Rear was in good shape when removed, no issues. Front needs a knuckle service and possibly a driver birf. Anyone interested...
  17. LSUfj

    High...ish idle

    I've had a 93 for about 4 months and have replaced the oil pump seal, distributor o ring, valve cover gasket, pcv valve/grommet, spark plugs, dist cap, rotor, and plugs (all OEM). It never ran terrific, but never bad either. I've advanced the timing to about 7deg and it seems to be running fine...
  18. LSUfj

    OEM Bucket seat mount bolts

    Anyone have a pic of the OEM bolts/washers that hold the seat slider to the bracket? My slider (and fixed pass side) has pretty big holes that appear to be original. A regular washer would fit inside the hole. I ordered an OEM bolt to see if it was different than what I had, but it also fits...
  19. LSUfj

    Selling my 100 in FW

    Posted in the classifieds. https://forum.ih8mud.com/threads/01-landcruiser-100-series-fort-worth-tx.607520/
  20. LSUfj

    looking for 80 series front diff...or front and rear lockers

    I need a replacement front differential. I'd really like to install an e-locker while I'm at it. If anyone has a line on a set of front and rear e-lockers let me know. The rear I have is a semifloat, so I'm looking for a full housing with brakes and all. I checked with Cruiseryard and they dont...
Back
Top Bottom