Search results for query: *

Forum search Google search

  1. ledbellyhead

    Chevy 350 with new TBI in FJ40 problem...

    Just filled her up, it did take noticeably longer to get close to E, the power and reliability is already worth it compared to the carbs I had, I'll let you know what I get. I had to take some time enjoying the new engine, stomping it at every light before checking mileage. It has been an...
  2. ledbellyhead

    Chevy 350 with new TBI in FJ40 problem...

    Alright, just an update, I made a video of it and got Brian at TBI chips to watch it, his first comments were that the MAP was probably not reading right, he figured out that the back port line I had hooked to it, J which is where the Vacuum schematic I had from the internet had it going was...
  3. ledbellyhead

    Chevy 350 with new TBI in FJ40 problem...

    New 350 injectors, runs a little better, but when she gets warm, same thing. I talked with Brian, he said to pull the valve covers and get the head numbers, take a vacuum reading at intake manifold, and mail the chip to him... another 50-150$... This is no simple install.
  4. ledbellyhead

    Chevy 350 with new TBI in FJ40 problem...

    Got you man, looks beautiful in Unicoi from the pics, definately too far for either one of us to drive without planning a weekend trip with the wife or something... But thank you for the idea.
  5. ledbellyhead

    Chevy 350 with new TBI in FJ40 problem...

    I'm in Lenoir City, Close to Knoxville, if your not close don't worry about it, I've never heard of Unicoi, unless that's Union County, I am thinking of building a cable and I have already downloaded the program, looks pretty neat... I'm gonna call TBI Chips today and hopefully figure...
  6. ledbellyhead

    Chevy 350 with new TBI in FJ40 problem...

    Thanks for your help again everyone, This is just a TBI swap, but it was a crate engine a few years ago numbers show from a 72 Chevelle. Looks like Terrx may be onto something here... From my ECM, 1227747, ATKX86ATKXK10922018, not real sure about the 9... Also 86ATKXK100220181, from...
  7. ledbellyhead

    Chevy 350 with new TBI in FJ40 problem...

    I tend to dive into projects without proper research, the guy on ebay said it was all I needed to convert a carb to EFI, he has great feedback and I will probably give him good feedback if I can get this thing going, Base timing is dead on with wire unplugged, when it stalls it is not jumping...
  8. ledbellyhead

    Chevy 350 with new TBI in FJ40 problem...

    I did the procedure where you jump terminals a&b wait 30 seconds, unhook IAC start, adjust rpm with throttle plate screw, shut off, remove jumper, unhook battery for a minute, hook up IAC, hook up battery and start and verify idle rpm, I have no tach, but I was happy with it, and the IAC seemed...
  9. ledbellyhead

    Chevy 350 with new TBI in FJ40 problem...

    Thank you all for the help, I am not sure what a broadcast code is? Is this the same as a trouble code? The IAC is shut all the way I beleieve, I removed it and it looks good, when I set the thing by pinning terminals A&B together it makes clicking sounds until removed, it doesn't sound bad, I...
  10. ledbellyhead

    Chevy 350 with new TBI in FJ40 problem...

    I was hoping to get some help here, the people at painless wiring blew me off even though it is their harness. I just put TBI on my small block in the landcrusher and thing is giving me problems I can't figure out or find answere to... It has power and sounds good until it starts to warm...
  11. ledbellyhead

    Wanted knob pulls, and other stuff

    Fresh pull what would you need for the cable? I think that the headlight bezel is larger than most of the others but I am not sure... Clint
  12. ledbellyhead

    Wanted  knob pulls, and other stuff

    I need all of the knobs for a 78 fj40 I have the switches, but the guy before me lost all of the knobs, I also need the choke cable assy. and the air pull assy. and the headlight mounting switch bezel that screws into the switch and holds it to the dash. any help appreciated. Clint
  13. ledbellyhead

    HEI Problem

    I thought I would post the problem so that others may learn from it, the reluctor ring was the initial fault, which I fixed, but when I did I also put a brand new module on from advance auto which was bad... I started swapping out old parts and finally figured it out.
  14. ledbellyhead

    HEI Problem

    I did that, I even took another battery and wired the distributor directly to see if the cranking was dropping the voltage too low, but still no success.
  15. ledbellyhead

    HEI Problem

    I was hoping for some help reguarding my s.b. 350 in my cruiser. It has been parked for many years as the restoration has been in progress, and today was the day to start the engine. Unfortunately I have no spark. I started by replacing the cap and rotor, no success then the coil, still dead...
  16. ledbellyhead

    FJ40 Fluid levels?

    Thank's Thank you very much Steve. Clint
  17. ledbellyhead

    FJ40 Fluid levels?

    I am restoring a 78 fj40 , when I started the project I drained all the fluids, can somebody tell me how much axle fluid I need to purchase to fill the stock rear end, front end, transfer case and transmission? I can't find the specs anywhere... Also I imagine that 80-90w is the proper oil for...
Back
Top Bottom