Search results for query: *

  • Users: dubyehnel
  • Content: Threads
  • Order by date

Forum search Google search

  1. dubyehnel

    Drive shaft tube between seat gear housing and motor missing

    Went to replace the gear on my passenger seat today and noticed the connector tube between the motor and the gear is missing. Two questions. First, any idea what part number that tube is? All the diagrams I'm seeing online just have the gear housing and motor listed, but not that part in...
  2. dubyehnel

    EGR Valve Test - Vacuum ?

    Having problems with high NOx and not passing Colorado emissions, so I went to test my EGR valve and can't seem to pull a vacuum with my mity vac hooked up to the EGR valve port that goes to the modulator. I thought there might be a crack in the hose that goes from the EGR valve to the intake...
  3. dubyehnel

    Another Colorado Emissions Failure

    Hi Folks - any help in guiding me in the right direction for a diagnosis would be much appreciated. I've got a combo of NOx and CO that are over the limit. The print outs are attached. Based on what I've read I'm thinking it may be the cats, but just wanted to check before dropping some serious...
  4. dubyehnel

    Front Corner Lamp

    Just replaced my lenses and they came with new bulbs and sockets. Now I'm thinking they don't work anymore, but first I wanted to ask the dumb question of when are these lights supposed to be on in the first place? I might just be looking at the wrong time.
  5. dubyehnel

    Bolt/Screw PN Help - intake plenum & fuel pump cover

    Hey, Need to get better at finding part numbers. In the meantime I need some help finding a bolt and a screw. See the attached pictures. First, I noticed one of the bolts is missing that fastens the upper and lower intake plenum. Second, I'm going to replace my sock fuel filter and one of the 8...
  6. dubyehnel

    TDS Alarm Removal/Disconnection

    Hi Folks, My TDS alarm system (the one with one button key fob) has recently been giving me huge issues. The act of starting the car sets off the alarm from time to time. Possibly shock sensor going bad? Anyways, I know nothing about car alarms, but is disabling the alarm as simple as...
  7. dubyehnel

    Bleeder Screw Part #'s

    Anyone happen to know them? Are they the same on all 4 calipers and the LSPV?
  8. dubyehnel

    Brake Bleeding Issue

    Just did a rear axle job and went to bleed the brakes. I can't get any fluid to come out of the rear calipers. I've poked around and the only thing I can think of is rusted/plugged up bleeder screws. I'm going to go get some new ones tomorrow, but in the meantime I wanted to check if anyone had...
  9. dubyehnel

    E Brake Shoe Return Spring Problem

    I cannot get the shoe return springs back on. (the two springs at attach to the top of the shoes) Any tips/tricks to get those suckers back on because I'm having a tough time extending them to get them on and I don't want to bend them.
  10. dubyehnel

    Two bolts to remove rear rotor

    Starting my rear axle job today and when I went to remove both rear rotors, I removed the calipers and then the rotors on both sides slid right off. I got kinda worried because both the fsm and the faq writeups mention two bolts to remove the rear rotor. Am I missing something or is something...
  11. dubyehnel

    Strange Electrical Issue

    Any help tracking this problem down would be greatly appreciated. Over the last couple weeks, every once in a while when I hit a large bump my radio has been shutting off and restarting a split second later and my ABS light has been coming on at the same time for a second or two. Yesterday I hit...
  12. dubyehnel

    Blinking check engine light

    Ok so I don't have any noticeable issues while I'm driving, however, during startup and when the key is turned to the accessory position the check engine light blinks continuously. It's not throwing any codes. Any ideas what could be causing this?
  13. dubyehnel

    Alarm Upgrade from TDS/Prestige

    Anyone have any experience with changing alarm systems? I have the TDS one button system that is pretty much dead. The shock sensor now sets off the alarm from the vibrations during startup, so I've had to disable it. I was looking at newer prestige systems(I believe this is the same as...
  14. dubyehnel

    Sun Visor Part Number

    I searched but I still couldn't find it. Anyone know the part number for a tan driver's side sun visor that fits a 96? I hear they may not still make the tan one. Please tell me this isn't so...
  15. dubyehnel

    80 series running boards free

    I've got a set of running boards off of my '96 80 series that have been taking up space in my garage here in Atlanta. I don't have the hardware for them anymore...I lost that ziplock bag of stuff a while ago but I do have the running boards that are still in great condition. They're free for...
  16. dubyehnel

    intake bolt

    Does anyone happen to know the part number of the bolts that connect the upper intake plenum to the lower intake plenum? I changed my oil and when I was taking out the dip stick I looked over notice that I'm missing one...uh oh.
  17. dubyehnel

    vsv for egr fixed PO401 I hope

    I've been trying to fix the problem that's been giving me the po401 code for about a year. I finally replaced the vsv for egr and reset the code. How many miles will it take until I can be sure the code isn't coming back and I can exhale? I've tried other things before and reset the code just to...
  18. dubyehnel

    PO510 Closed Throttle Position Switch

    ok so I searched and could only find one thread on this subject to I wanted to post again. I got the engine code po510, closed throttle position sensor today. I really have not noticed anything wrong. the only thing ive noticed is that there is a slight rattle when my foot is just barely on the...
  19. dubyehnel

    startup engine clunk

    Lately there has been a rather loud clunk noise coming from the engine as I'm starting the car. It actually has only happened about 3 times in 2 weeks but I was just wondering if anyone had any idea of what this could be?
  20. dubyehnel

    horn fuse

    The fuse that is for both my horn and emergency flashers keeps blowing. I've got the right size fuse in there and all but it blows every few times I blow my horn. I really never use the horn though but it bugs me when I want to use the flashers. Anyone ever have this issue before and have any...
Back
Top Bottom