Arizona Classifieds / For Sale / Wanted (7 Viewers)

[Living in the Past]

ROUGH AND TOUGH ALL ORIGINAL 77 LAND CRUISER AVAILABLE NOW!

I went to see this one and it is very clean. the sticker says 23,9k but a guy in Alaska has got them down to 18k. this company got it with a bundle of hotrods that they got through a purchase

Interesting you thought it was a good one? I see the shackle angles front and back and see issues. The side view of the passenger's side of the hood is way out of alignment. Would check the frame to make sure that's not causing the problem. I have four 40s sitting a garage that didn't cost $18k combined.

Looked again notice no license plate bracket on the rear. Then notice how the hard top in the right rear sits. Something is way out of alignment there as well. Sorry I seeing a Run Forest Run cruiser. Especially at $18K. Seen that much just glancing at the pictures for a few minutes as I have no interest in buying another FJ40.

 

[wtmtnterror]

I have 4 Tundra TRD wheels without tpms sensors for $300, I also have a set of spidertrax wheel spacers 1.25" for $150 I'll get pictures up tomorrow, the wheels are in excellent condition.

 

[Camelcruiser]

WANTED
used springs or even full lift kit for a fj80!

 

[Otter]

Stock 100 springs with 160k miles. Make me an offer.

 

[Otter]

Selling 5 stock 18" 100 series wheels. Have center caps, one is cracked. One wheel has corrosion. Have 275/65/18 BFG KO2s on them. 2 years old, maybe 10k miles on them. Traded out for 16" wheels. Have some chunks and slices from Wheeling. All hold air, never been patched or plugged.

$500 obo

 

[OffRoadScott]

Looking for the proper lug nuts for Tundra/Sequoia wheels.

 

[-Spike-]

Looking for the proper lug nuts for Tundra/Sequoia wheels.

I've been lucky asking nicely at tire shops, such as Discount. They often have bins of used lug nuts.

 

[OffRoadScott]

I've been lucky asking nicely at tire shops, such as Discount. They often have bins of used lug nuts.

Thanks for the idea

 

[blatant]

@OffRoadScott i've a full set of Tacoma lugs, but no idea if they're the same.

 

[Jgunner]

*sold pending funds*
3rd gen 4runner takeoffs. All tires are in good shape, 3/4 tread left, no plugs/patches or issues. Little bit of weather checking but id drive to maine and back on em with no second thoughts. 16” wheels fyi

$150 located in mesa. Sold pending funds

 

[Jgunner]

Pending sale - I have a brand new set of 4 Cooper stt pro tires in 37x13.5x17. Never mounted, I need the space more than I need the tires. $1100

1 pair of nearly new black corbeau sport seats. Thought I would put them in my 80, but ended up getting new cushions for my factory seats. $300. I bought them from a friend, they are slightly used.

Ome stock height springs for an 80, great shape $200

View attachment 2026894

View attachment 2026895

View attachment 2026896

View attachment 2026897

seats still available? I may be interested, mulling it over

 

[peacesells63]

seats still available? I may be interested, mulling it over

They are. Let me know if you have any questions

 

[Jgunner]

They are. Let me know if you have any questions

Where are you located?

I like those seats, was going to order a set in tan, cause black gets so hot, but still contemplating it

 

[Jgunner]

My seventeen grandson was just given a 93 FZJ80 by his dad, my ex son in-law. I haven't seen it in years. My daughter told me it missing a bunch of little things like door lock and window knobs off the driver's door. The Land Cruiser emblem on the back is broken. This is a maroon 80 with what I believe is grey leather interior. My daughter told me the seats are trashed if anyone has something in decent shape. I remember years ago the passenger seat was stuck all the way forward and not sure if that was ever resolved. Currently not in the valley to look it over but sure more needs to be done. On the negative side years ago the clear coat on the paint was already shot. On the positive side it does have E-lockers.

Ive been contemplating selling my factory seats(fronts, middle and jumpers) for a while, tan cloth, manual seats in 9/10 shape.

I would need the middle bench from the buyer, so i could reupholster it to match whatever seats i decide to go with. I don’t know what these go for, with sliders and such.

 

[Living in the Past]

3rd gen 4runner takeoffs. All tires are in good shape, 3/4 tread left, no plugs/patches or issues. Little bit of weather checking but id drive to maine and back on em with no second thoughts. 16” wheels fyi

$150 located in mesa.

View attachment 2053956

View attachment 2053957

View attachment 2053958

View attachment 2053959

Where are you in Mesa? Will be in the valley next week and would take these 3rd gen rims/tires. Would work as a good spare and wheels for my trailer made from a seventies Toyota pickup.

As for my grandson's new him 80 series next week will be the first time I've seen the cruiser in years. Will get a idea how bad his seats really are. I know with a red exterior the interior is grey. Being his first vehicle not sure how much they plan on putting in to it. Will ask.

 

[OffRoadScott]

@OffRoadScott i've a full set of Tacoma lugs, but no idea if they're the same.

Do they look like these @blatant ?

 

[medtro]

Ive been contemplating selling my factory seats(fronts, middle and jumpers) for a while, tan cloth, manual seats in 9/10 shape.

I would need the middle bench from the buyer, so i could reupholster it to match whatever seats i decide to go with. I don’t know what these go for, with sliders and such.

My dream seats. Best 80 series seats IMO.

 

[blatant]

Just checked, sequoia/tundra nuts are different size, so you're outta luck

Do they look like these @blatant ?

View attachment 2054025

 

[peacesells63]

Where are you located?

I like those seats, was going to order a set in tan, cause black gets so hot, but still contemplating it

Far NW Surprise, just outside of Vistancia.

 

[medtro]

Just checked, sequoia/tundra nuts are different size, so you're outta luck

Tundra lug nut size went from M12 x 1.50 to M14 x 1.50 in 2007. I am guessing @OffRoadScott has the earlier wheels for his 80. Your Tacoma lug nuts should work if he has the earlier Tundra/Sequoia wheels.