80 series swing out tire carrier bumper

[sean]

main beam is made from 3/16" rectangular steel, everything else at least .120 wall. 3/4" thick clevis mounts that pass through bumper and are welded to the frame brackets, side protection brackets bolt up to existing captured nuts on frame, and those brackets are made of 5/16 and 3/8 steel. i use 4x4 labs spindle setup for the tire swingout, a 1k spindle for an optional 2nd swinout 3 jerry can rack. destaco 2k over the center compression latch incombination with a 1/2 drop pin keeps it shut tight. has high lift and antenna mount. tire mount flange telescopes in and out for differant size rims and offsets. 2" reciever. full bolt on except for the rear crossmember which has to be cut out and removed.

 

[Haring Bagsik]

What's the rating on the tow hitch?

 

[DWSCVR]

Shizizel that thing is sweet,How much to send one of those to the east coast ?

 

[LandCruiserPhil]

Get ready to get busy because this is a deal

 

[Chef J]

Ship it to Michigan and I'd go for it for sure

 

[pinoytoys]

Nice bumper!

 

[fjc8871]

You are going to need to figure out a way to ship these it looks like. Very nice work bud! See you Sunday AM!

 

[LBJ75]

Interested!! Is this the start of a waiting list? For those that want it shipped I have had good luck with FedEx. If you set up an account and arrange a call tag they will pick it up and ship it to your door. I had an ARB shipped from Maryland to California and it was around 120 bucks.

 

[LBJ75]

https://forum.ih8mud.com/80-series-tech/404280-just-built-rear-bumper-swing-out-tire-carrier.html

 

[sean]

wow. looks like i got some figuring to do. fed ex will p/u and deliver to the door? interesting. i gonna check it out. will get back to you all.

 

[missipboy]

Put me in line too if you'll ship it.

 

[Impreza]

Beautiful unit...somebody should do a group buy in New England! Much easier to save on shipping that way.

 

[sean]

to residenc ups grnd from sd to boston around 200. i am goona start to build another one today. i would like to start on one for local pickup and install if possible to get things rolling.

 

[cruiserep]

i need to buy one of those rear bumpers with tire carier?

have a lx450 trail and daily driver that needs a rear bumper bad. i live in wichita ks. 67207... 316-519-8246.I have been looking about 2 weeks now and really like yours for what i need.names jesse.call or message me back when ya can please.thanx!email is. shank888@gmail.com

 

[Vasir]

Ship it to Michigan and I'd go for it for sure

maybe i can jump in on this bandwagon? a piece of my rear ARB bumper falls off everytime touch it (damn rust)

 

[Chef J]

maybe i can jump in on this bandwagon? a piece of my rear ARB bumper falls off everytime touch it (**** rust)

Sean, Looks like thats 2 to Michigan, you could put Vasir's & mine on the same pallet for your convenience. Let us know man, I'd definitely like to get one mounted before the snow flies here.

 

[M23TLC]

to residenc ups grnd from sd to boston around 200. i am goona start to build another one today. i would like to start on one for local pickup and install if possible to get things rolling.

Plan on it getting scratched, dropped, etc. on the way. Does it weigh less than 150lbs? I'd hate to deliver it (see sig), thats for sure!

 

[Chef J]

It would likely have to go to a freight depo or somewhere with a loading dock (commercial address), FedEx freight is likely the best option. If the receiver does not have a commercial address I believe that FedEx freight will accept the shipment to their local depot for pick-up, or set up delivery to another freight depo for pick-up. Christo sent my front bumper and suspension this way, I dont think he used FedEx but it was like another couple hundred or less. No big deal really, I just has to go about a half hour away to pick it up.

 

[M23TLC]

^^It CAN be shipped door to door via UPS Ground, as an option.

 

[sean]

this is good info guys thanks for the help. i am going to figure out how much this baby weighs as soon as i can figure out how to weigh it.