xtiaan2000's latest activity

BTW, just uploaded an updated engine start and run video. The tuner (Michael) came over and worked out a kink in the programming maybe 2 weeks or so before the river trip. 👌🏼

Look at the first 2 pictures in this post to show you where the 80 exhaust runs over the rear crossmember. It looks like you have room to snake it through on either side, but it will be tight and lots of bends or pie cuts. 80 exhaust

Heatsheild or wrap for Safety 😘

Would this end up being too close to the filler gas hose or even the gas tank?

It would of been cool to have cleaned up the area. Not cool enough though.

That Panhard bracket is in the way. It squeezes out right below that cross member at full bump. With that Delta correcting bracket it closes up that space. So the idea seems that to just reverse. Instead of going up on the driverside come...

On the 80 it goes up and over the crossmember and under the body where the springs are on the passenger side. What's your clearance to run it over that crossmember and out the passenger side?

With the big gas tank there is no room on t he passenger side. I will post up pics later today.

Thoughts?

Bit of a milestone to have most of the peices back together. Time to start on the 80 harness fitout. Make some brackets for the ECUs, and find out what I am missing.

Transfer case and drive shafts seem to block the passenger side.

On my quest to quiet down the cab I have been struggling with the exhaust. Originally I had it set up to go all the way out behind the driver tire, but I had not added this Delta part. You know, to handle the three inch lift I put on. Now...

SPAL 16" Pusher Thermo Fan installed. Fits like a glove. New 12000lb winch mounted with in cab controls.

Fixes so far from my Cruzer Cult Colorado trip- Topped off the transfer/ transmition Fixed rear shock Found out how to dim roof lights Oh boy, front passenger sway bar bracket had lost the nut. Fortunately I had bought a spare!!!!!! And the...

Makita radio-18v battery pack (same as all my cordless tools) sits inside it- plays forever on one charge. I'm currently running the pig with a Home Depot contractor garbage bag (2 layers of 6mil plastic) taped over the hole with Tyvek building...

What’s that little device on your front bumper? My 2 cents- dont rush the hood scoop! You have a nice one now that could work, but grab a beer or three and start playing with the cardboard. Something might come out of that playtime that makes...

100 different guys will have 100 different ways. Some guys have all the right tools, some don't. Some guys have all the time they need, some don't. There's no real wrong answer as long as you keep it on the road and enjoy it. Kudos to you for...

Trim it 🤔🧐😉

Try it, but I was given an fj40 outer boot and its totally different from fj55

Someone ain’t messing around! Nice!

Took a side quest today and fitted up the last peice of rear quarter chop. Also being sunday enjoyed a slow cooked beef chilly and VB. Great Australian advertising below.

Good old eBay. I hope this is what I need! I imagine that this is going to help a lot!! I have never had this before.

Good idea 8 bucks 👍🐖💨👈

Put a Fake one in 😳😲😮🧐😘🤣🤣🤣🤣🤣🤣