Oakleyguy's latest activity

Awesome find. Super cruiser all the way!

So uh, not a 100 series, but for $1800 couldn't pass up this non-running 2UZ 2003 4Runner: But wait a minute... Let's look closer here: That's right: Previous owner had it for 8 years, and one morning in winter started it up to warm up...

The balance of the vehicle system and computers still require the 12v in order to power on. If the hybrid battery is flat, the LX will start using the traditional starter and 12v battery. In normal operation, the 12v system powers on and then a...

Thanks @Vicgeorge for the inspiration! She’s thick of 286/75/18 KO3s. More to come!

The front did have a lot of debris, hair, etc on it. I’d say 20%-ish blockage.

Here is the sensor for future reference, PMV-E005:

Oh heyyy

Yes it is. Picked them up off of Amazon. They seem legit.

5w-30 is an acceptable weight in other markets based on their owner's manuals.

Hey all, does anyone have confirmed part numbers for compatible TPMS on the LX6/7? There are a shocking amount of part numbers available and I haven't been able to pin down OEM numbers that I'm comfortable ordering yet. Worst case I may try...

There's just something about a minty OEM radiator with all the fins in perfect order.

Noticed the coolant reservoir was empty, lo and behold my radiator was ready to give up the ghost. In parallel discovered the recent clunking in the suspension. $600 later and she has a new radiator, hoses, and sway bar endlinks. Original...

Is that a depo housing?

I was thinking about this, if it continues to bother you, have your tint shop put some ceramic tint on the sunroof and that should reduce the issue.

Haven't noticed that here in temps well over 100 with high solar load. I will say though that climate concierge is too gentle and I have to keep my temp set point 1-2deg lower than I did in the 200. I experienced this in my GX as well.

Dang it! that's another $60 I couldve saved :) Time to order more I suppose.

Anyone have experience replacing a door and fender? Is it hard to get them lined up?

So lame as I just spend $600 during the 15% off labor sale. lol

Utilizing the 110v power outlet we were able to run the fridge, by way of 1000wh Jackery, for 8 days straight without issue. Had I had a good way to mount the Starlink Mini to the 300, the power outlet would have kept the battery charged enough...

I love my BushCo awning, but I didn’t like how it was mounted on the roof rack. I have a Dissent roof rack in the angled sides make mounting things on the sides difficult. Dissent makes some awning brackets, but they’re not heavy duty enough for...

Can confirm the Slee sliders are indeed frame mounted.

I can say that we should see the production sliders before end of year. I had eyes on their final pre-production set and the sliders are looking great and will live up to Slee's reputation. The production set should have AHC protection. Skids...

I was in their shop looking the truck today; looks like removal of their rear mud flap; some minor liner trimming, their front bumper, and +25mm offset wheels.