Recent content by MauricioR

  1. MauricioR

    Rebuilt 1HD-T engine blowby when hot

    I ended up swapping to a 6BT.
  2. MauricioR

    Builds Toyota '96 HDJ80 - Cummins 6BT conversion

    Well I love it... Tons of power everywhere on the RPM range. If its keep under 2000 RPM diesel consumption is good (7-9 Kilometer per liter - an Average of 8). I love how diesel feels and the power of it. Some people prefer petrol and go V8 on this model which is cheaper and you can get equal...
  3. MauricioR

    Builds Toyota '96 HDJ80 - Cummins 6BT conversion

    The inevitable happened!!! After quite some mods to the engine (around 350HP and around 1000nm later) the 5th gear failed: Both Counter Shaft and 5th gear shattered. I had a word with an expert about this... He told me that the H151f is very strong but not strong enough to handle the...
  4. MauricioR

    Builds Toyota '96 HDJ80 - Cummins 6BT conversion

    I did the trick using a 11 inch low profile on one side and a 16 inch performance on the other.
  5. MauricioR

    Builds Toyota '96 HDJ80 - Cummins 6BT conversion

    Hey guys, so I have been absent for a while... I have heavily modded the car after it got out to the Streets with the 6BT. These are some of the mods I have added to it: *37 inch MT tyres. *Removed the front bumper. *Removed the mud flaps. *12K LBS winch. *1 inch rubber spacers on coils. *2 inch...
  6. MauricioR

    H151F Replacing Synchros on a '96 J80

    I just bought 4 liters of these: Hopefully it will work fine. If not I will try the Castrol VMX-M.
  7. MauricioR

    H151F Replacing Synchros on a '96 J80

    Will check that as soon as I can.
  8. MauricioR

    H151F Replacing Synchros on a '96 J80

    I had some issues with my clutch past month and it was too hard to shift gears, I drove like this for a week. When I fixed my clutch I noticed the grinding got way worse on 3rd and now 4th was showing the same behavior which was not happening before, I broke the Synchros for sure, not sure if...
  9. MauricioR

    H151F Replacing Synchros on a '96 J80

    Okay got it, thank you guys, Toyodiy is now listing only the ones I mentioned: Will buy all these 3.
  10. MauricioR

    H151F Replacing Synchros on a '96 J80

    Okay so, according to Toyodiy mine was produced on 1994 actually:
  11. MauricioR

    H151F Replacing Synchros on a '96 J80

    Okay, according to the papers, it was sold on January 18th 1996. So it should have been manufactured on 1995? This is the plate on the firewall.
  12. MauricioR

    H151F Replacing Synchros on a '96 J80

    Hi, since I bought my J80, the 3rd gear grinds... In the past it used to grind some times but now it grinds every time and now 4rd gear started to grind as well. 1st, 2nd & 5th are fine however I will replace all synchros. I am using 75w90 GL4+ oil on the trans right now, GL4+ means is a blend...
  13. MauricioR

    Builds Toyota '96 HDJ80 - Cummins 6BT conversion

    Hey guys, the car is running like a champ. Dont mind about the disability spot, that is my "assigned" spot for work. I will post a video and some pics about the final project as soon as I finish with the gauges and hood scoop :facepalm:
  14. MauricioR

    Builds Toyota '96 HDJ80 - Cummins 6BT conversion

    Around $24.95 the kit + $13.58 shipping to my house.
  15. MauricioR

    Yes I know another turbo question

    There are plenty of cheap options here: https://shop.mambatek.com/searchquick-submit.sc?keywords=1hd Google is your friend to find out which one you will need. How much PSIs are you looking for?
Top Bottom