kerrye's latest activity

  • kerrye
    The failed clock spring/spiral cable.
    • 1860BA31-FD0E-46B3-8F59-7F1EE51DBB70.jpeg
    • 9E529BC5-4752-445F-A9AA-15261FBF142C.jpeg
    • 15C2799D-7B6F-4105-BDB1-12BEF54B7A89.jpeg
    • FE257189-DE0A-4993-995E-06E60DF608E4.jpeg
    • 63615AC1-2809-42C1-821C-53F8245449C5.jpeg
  • kerrye
    Thank you very much. I bought that code reader. It both read the codes and erased them getting rid of my airbag light. It had 4 codes all related to the failed clock spring/spiral cable. Harbor Freight even had an open box one so it only cost...
  • kerrye
    Yes, just got the 100 Series and I've been looking for Techstream. It appears I need a Microsoft computer to run it? In only have a Macair at the moment. I did try my cheap OBDII scanner but it showed no codes.
  • kerrye
    kerrye replied to the thread Horn no longer works.
    I did need a steering wheel puller to get my wheel off despite the tutorials suggesting it would pull off fairly easily.
  • kerrye
    kerrye replied to the thread Horn no longer works.
    I installed the spiral cable I bought on eBay this morning. Fixed the horn and cruise not working but air bag light is still on. Not sure if the air bag light needs to be reset or if it should automatically go off if the spiral cable solved the...
  • kerrye
    Air bag light was one, horn and cruise not working. Figured it was spiral cable. Replaced it. Horn now works and cruise works but air bag light still on. Does the air bag light need to be manually reset or should it go off automatically if...
  • kerrye
    2002lx470. Horn and cruise control not working, air bag light on. I believe I need to replace the clock spring. Are there any precautions I need to take when replacing the clock spring since the vehicle has VGRS? I'll link a replacement...
  • kerrye
    kerrye replied to the thread Rear Heater Bypass?.
    You can also remove the T where the rear heater lines connect to the main heater lines at the back of the engine and replace the T with a straight connection. 5/8" brass hose repair coupling fits. Fix box stores also carry 5/8" plastic hose...
  • kerrye
    The EGR is designed to lower NOX readings. A bad vacuum modulator or EGR valve can cause high NOX. Urban Car Care on East Evans has gotten my NOX readings down low enough on our 80 series to pass the test. I've found no direct connection...
  • kerrye
    kerrye replied to the thread Horn no longer works.
    It's common for a bad horn button to be cause by a bad spiral cable or clock spring. I'm suspecting my non-functioning horn may be caused by that. I just bought a replacement clock spring/spiral cable on ebay for $17. Looking at a tutorial, it...
  • kerrye
    Just purchased a 2002 Lexus LX 470. Horn does not work. Found two horn relays just sitting in center console. Person I bought it from says the relays were there when he bought it. I presume the horn didn't work during his 5 yrs of ownership...
Back
Top Bottom