kbfj621989's latest activity

I would try a new OEM gas cap and not the autozone one.

Looks like it is factory :)

Did a little mod to preserve that razor thin tailgate edge when transporting long things. Found some super-durable reinforced rubber edging. The upper tailgate weatherstrip seals against this when it’s all closed up. I bought more than I...

Check the oil. If it's there, put a battery in it and turn the key.

I’m having this problem near Bozeman, Realtime, just had fuel boiling. I assume the CC is pretty saturated. I have Slee belly pan. Wouldn’t hot restart when going to top off, which is when I noticed the fuel issue. Once cooled down started...

Enjoy. There is also light in the ashtray and around the cig lighter.

New ujoints in the driveshafts, replaced output shaft seal on the transmission (leaking trans fluid out of the transfer case/trans mating surface), and new rear brakes and rotors.

Bought some parts before the end of the de minimus exemption. Replaced hazard switch light bulb and also vacuum hose and related valve as mine was showing some cracks. In swapping out the valve, I made a mess as I did not realize how much power...

fun to see fellow skaters.. and if this is unrelated, please feel free to delete, or move to another section. After seeing a kid at our school riding an electric skateboard, i decided to build my own a few years ago… CNC motor mounts on...

If you make it to 350k, your "D" light starts working again.

SOLVED!!!!! I wanted to update everyone on the fix for this issue, the dealer replaced the L4 Switch and the car drove fine after this. It wasn't cheap as it was at a dealer rate and dealer parts prices. However, I did not have a choice as I was...

Have you checked your wheel speed sensors? This happened to me, except I did not get a CEL or any other light. One of the wheel speed sensors was barely hanging on by 1 strand of wire

Put my second set of tires on this past week since owning. These were at a great price but I found very little feedback from anyone who has tried them. Specs seem to be pretty good. They are definitely one of the more aggressive A/T tires I have...

Maybe post some pictures of the engine bay showing us the areas you’ve been working and some of the vacuum lines in these areas.

Found a 8mm barb fitting with 8x1.25 threads. Tapped the box and used some petroleum jelly on the tap to catch the shavings. I wish there was more plastic to work with here, but it is what it is. Used some black FIPG to seal it and barely...

1. 89FJ62 2. Bill C 3. NA 4. 134,000mi 5. Stock - fully refurbished at TorFab 6. Weekend driver

I have used Rallye in NY with good success and very good pricing!

Prices vary per dealer. Try a different dealership. I like Bell Lexus :)

Please forgive me if this topic has already been covered. I tried searching the forums for "Toyota face ripper" and nothing came up. I probably spend more time underneath the 100 (LX470) than inside of it and I'm always getting scratched up by...

Clean looking truck! Welcome! Is your name Art, by chance? Import exporter? Latex salesman?

Hey Y'all. Just wanted introduce myself. Been lurking since 2020 after I bought my 98 LC and wish I knew about this site before I bought it lol. What I bought to be a weekend beater turned into a mechanical restoration project as some items...

Lexus is having a 15% off back to school sale from 8/6-8/12

Spotted in Wilmington NC today with some pretty solid beach buggy/55 vibes.

Did your mechanic find/fix the issue?

The trip ended up being about 3800 miles all together over 17 days and we were averaging a hand calculated 14mpg across the trip. Gas on average was about $3.50/gal so yes about $1K in gas is correct. Cant put a price tag on a good old...