Recent content by jsix321

I’ll flip the rear driveline so that the DC joint is on the TC side. I didn’t rotate the rear axle. I did install the offset bushings on the front axle to rotate it. I installed a 2.5” OME kit.

I just replaced my driveshafts on my 97 model with Tom Woods shafts that have double cardon joints. My question is more geared toward the rear but will give a quick rundown. The factory front shaft has the slip yoke at the axle end and the factory rear shaft has the slip yoke at the TC side. I...

Please text me your number, interested. Justin 817-301-3828

Thanks for the plug and play answer, it is what I’m looking for. I’m also doubtful this will fix the problem but read one thread regarding another mid member and it ended up fixing his problem. Worst case I’ll adjust the sensors myself. I’m picking it up from the dealership Monday and will...

They’ve flushed the AHC fluid a couple times but didn’t help. Part of back story I forgot to mention. I did add some AHC fluid earlier this year that turns out should have been recalled and it took the AHC pump out. Dealer replaced it at no cost to me and flushed the fluid at that time...

I’ve got a 2008 model lx570 that has driver side lean that seems more than normal. Also when I’m driving the car and it gets around 60 mph the back end raises and lowers itself, doesn’t seem normal but could be wrong. I’ve taken it into Sewell Lexus here in Fort Worth and they’ve had it for...

Thank you for the reply. @lx200inAR

I’ve got a 08 LX570 and the driver side of roughly an inch lower than the passenger side. I’d like to do a sensor lift, but would like to level my rig before then with Techstream. I’ve already ordered and have the cable, just need a little help on where to go from here. I’ve been searching and...

Sorry I just now saw this. Please let me know what you need for that carb if you still have it. I was able to find one that needs rebuilt if you need it as a core. Or if you sold that one I could send it to you for a rebuild. If you’d like, my contact number is below if you’d like to call or...

@65swb45

Sounds good and I’ll get pictures of everything I have so you’ll know what I need. Please pm me a cost for all parts and for you to work your magic on the carb if you rebuild them. Also please let me know an estimated timeline of you have an idea of one. Also what is the number to your shop...

@FJ40Jim @65swb45

I’m in need of a carb for my 1971 fj40. Preferably in working order but would accept one that’s rebuildable. Must have all pieces and parts and include everything needed to mount to manifold. Please send me a text if you have one. Justin 817-301-3828

I need a couple kits also. Any news on when they’ll be in stock?

Got mine finished up and powder coated.