JackA's latest activity

Unfortunately for my time and pocket book, it was pretty easy for @DirtSniffer to talk me into buying one of these.... Truth be told, I am not sure why I overlooked these over the years.... I should be thanking Dan for showing them to me. lol. We...

Lots of people think the Toyota fluids are better and worth the extra money. I don't adhere to that belief and haven't had any issues that could be attributed to issues with the fluids myself, but that isn't a conclusion that there isn't a...

Transmission cooler lines connected and secured in place.

Great pair

Finally, after 2 years I got my correct era license plate registered. Arizona used this plate from 1969 to 1972. Blue truck gets to hang out with the 1969 Mustang in the backyard.

More hose routing and attaching various goodies. Made a mount for the transmission cooler. I converted the trans cooler hard lines over to hose barbs. The Eastwood flarimg tool is the best. Then will connect with proper hose to cooler.

Mounted the coil and located where the ignition box will fit. Need to get hardware to mount that. Plus another gratuitous engine shot.....

Working on loose ends. Starter is now bolted in and wired. Main engine ground is done. Got the pcv and brake booster hoses attached. Transmission module too. Working on wiring mock up to figure out where to mount the ignition box and coil...

Thank man. 👍 Despite being 116 degrees today, i got some time in on the 68. Had my swamp cooler rolling for a workable 90 degrees in the garage. Got the condenser mounted for good with pressure switch and harness. Mounted a new voltage...

It’s alive! Bad points, but has new ones now and a condenser and coil. Condenser and coil were both still good, but when I thought the coil was bad I ordered a new, so spare time 😂. Dwell’s at 45 with a gap of 0.018”. I’ll increase that a...

Nice work 👍

Working on the air conditioning system. Got the condenser, dryer, and some lines mocked up. There's a factory indentation in the core support that needed to be opened. Fits good so far.

Good explanation. I have always struggled to explain what this is when people ask me. I am going to steal this so next time it will sound like I know what I am talking about.

This........

Upside down and front to back

Since this is a Cruiser site, my LX470 lent itself to being a paint drying rack.

Plus that shackle is not installed correctly.

Lastly.....

Some more......

Took the fake 45 up to one of my favorite car shows today. Its the Prescott Antique car clubs 50th annual Watson Lake Car Show. Made friends with a Mustard yellow 1977 40. Here's some random pics......

Looking good 😉

Installed a new battery. Started putting together the condenser, dryer and mounting plates.

Got the new hvac system. It's by Classic Auto Air. Looks pretty good on first impressions.