Sockets: 8/10/12/14/17/19/21/22/24/27
Wrenches: 8/10/12/14/17/19/21
Pliers/a crescent wrench/54mm hub socket/3-prong rear axle hub socket if you have a FF rear axle.
Snap ring pliers/vice grips/E12 socket if you have upgraded knuckle studs...
Didn’t get on Too until this afternoon. Tie rods out for new TREs. Soft brake lines all getting replaced.
Wild how nice and easy these desert trucks come apart. Even the brake lines come apart like new.
@OGBeno has been out doing desert rat...
Went for a nice drive. Tire and suspension update is nice.
Filled up the OEM can with no corn for Brendan
Picked up a pallet to make sure I put the first scratches on this freshly painted bed
I had to take a few days off to go fetch the JTU60 and the monster F450 that broke on me in Arkansas.
Today I spent cleaning up the 60 and doing some house and shop work
The Wizard came out and made the 6 on 5.5 spanner for the spare...
We installed the front coil springs at the end of the day.
Trans crossmember was a bolt in and done deal. Same for drivelines, surprising but everything is good to go there.
Cheers
…ah well, I’ll try my local and if no joy, then I’ll just earplug out the strident whine of my rorty 2.8 turbo…
…apologies for the extended hijack of a truly delightful thread…
Hello,
There are two charcoal canister models.
Trucks built until around 1995 or 1996 had the model that goes next to the radiator. This canister is discontinued.
Trucks built after that date have the newer model. Nolen's truck has it. This...