73FJ40's latest activity

https://forum.ih8mud.com/threads/socal-mint-condition-73-77-fuel-separator.1352857/

BTW, the European P/N for the >1974 windshield is 56111-90303-83. This is the P/N you could find in Europe, I see it still listed available on Xexpress and it may be available in some places, not 100% sure of today but I know people that were...

I tried Amayama for you and price = 282.58, shipping = 79.01 (to Austria), delivery = 9/7/25 Part number 56111-90303

Get the british standard pipe tap barbed nipple that fits pump and carb - eliminate all the extra hose clamps and fittings. Buy a section of fuel hose to go from the carb to the pump. I buy rolls of USA fuel hose off ebay 5/16 x 25' for $32...

@Cloud40 - FWIW: The OEM Part Numbers Nut: 90402-13041 Olive: 96395-71400

IMO, it actually isn't hard to justify for many. $375 for an discontinued OEM (Aisin/Advics is OEM) part that will last another 30-40 years (or far more by tossing in a Japanese rebuild kit), is pretty modest imo. Note, we (Cruiser Oufitters)...

Sell it and improve the quality of life for someone excited to get it fixed up right :D If you think I'm retiring on the handful of NOS AISIN master cylinders we have in stock, I'd love to sell you a business with the inventory so you can retire...

@Coolerman provided an excellent step-by-step process, including pictures, on how to rebulid a 3 speed transfer case. https://globalsoftware-inc.com/coolerman/fj40/34A.htm I recommend reviewing this for guidance on what may help you with your...

Rear heater back together too. Just need to add the PN decals when I install in the truck.

I cut out my wiper gear box gasket today. Pretty close. I scanned the old gasket then uploaded as image to the cricut software. I used 1/32" gasket paper and set the cricut on kraft paper.

Pulled from a rig over 40 years ago and kept indoors ever since. Comes with the mint condition clamps check valve and T fitting. $100 plus the ride from Burbank

50yo plastic that has been stored in a warehouse for 30 years is not the same as 50 yo plastic pulled from a vehicle sitting in a field. I have over a dozen good used ones available for sale.

Fan blades and airplane wings have a lot in common. Blades and wings cut through air, the resulting higher pressure on one side pushing air (bottom of wing, engine side of fan) causing a difference in pressure, lower pressure on the other side...

"noticed the radiator overflow was gurgling and some antifreeze had leaked out." I do not understand this observation. If you have the OEM cylindrical overflow tank, isn't the radiator overflow hose connected to the bottom of the overflow tank...

Direct drive or clutch fan?

Rock Auto has heater cores listed for 1969 and newer. Specs below will let you know if it's interchangeable with your core. $76.79 plus tax and shipping by fedex ground to 24171 is $18.99...

JACKPOT! Early sector rollers! A whole other box that literally slipped through the cracks. This box predates the one that I have been tapping for rebuilds for the last decade. Looks like I will be set for quite a while longer.😊

Likely source for the parts you need (if still available): http://www.cruiseroutfitters.com/engineparts.html 3 & 4 Speed Transfer Case Gasket Set - $18.50 Kits include gaskets only, please order seals shown below as needed. (Fits 69'-7/80'...

My 73 had the dealer-installed Warn sticker affixed to the heater.

Got em both Dennis