doughboy

I'd be interested in the bug screens depending on costs. I'd want just the screens for the rear door windows for an 80. Thanks @mot

Hey, y’all! (Warning: copy and paste job for my big screen thread) I know this is (WAY) out of the blue, but lemme know if there’s anyone looking for these screens (or the sun shades I had offered also). I happen to be in Japan for a couple of...

That was the correct part number. Thanks again.

Buy a used VW - it'll fit perfect 👌👌

Realized i had never reposted in here after i did mine. Here ya go!

you have PM

Hey All, I’ve got two different 1FZE manual transmission ECUs that I ended up not needing. First one I believe is an Aussie spec ECU it will eliminate the check engine lights associated with converting from auto to manual but I believe the...

Hi my name is Jerimy, I'm a US Navy veteran. Served from 2002-2012 I was an AT (Aviation Electronics Technician), I served aboard the USS Kitty Hawk & USS Abraham Lincoln, I also did a tour with VP-1. I worked on F-14, F-18, S-3, C-2, E-2, H-60 &...

Well, now it's done: ToyotaMatt is no longer a forum member. Really another great resource lost, and it's threads like this that pushed it. Plenty of blame to go around, but it's not all the vendors'. Not defending VTP business, it's the...

This issue is also common in the LC300 as well. Many people have complained about this (in my region) and our local dealer is now shoving up rubber bricks inside the hood vent openings ( under the thermal insulation). In my case, that did solve...

It doesn't get much more "other vehicles" than this. Maybe an airplane? A buddy of mine had several vehicle like this.

I also think it'll be a little different because it's coming back to the US. I honestly think that message was just a little bit of hate because he's getting no hits on the LC he's trying to sell for a +$20k profit.

Good advice…thx!

You might have some better luck posting it on the risingsun4x4club.org

Final pics

I second bending the brake line up yourself. It’s so easy, even a girl can do it. Just kidding, but it is easy and relatively inexpensive to do yourself. I helped bend up and install all new hard lines in our ‘75 fj40. You can get good NiCop...

Hi, new member here. Still trying to familiarize myself with this place, but I guess I post the intro here? Anyway, I had a '93 f350 7.3idi back in the day. I was restoring it slowly, until it went into limp mode. I spent around 6k on a new...

It looks like it's 47327-60080, but that looks like it's for a 92-95 80 series w/abs. But I've been known to be wrong. But you can also make your own hard line. I made my own hard line for the front line on my 81. It wasn't bad at all. Bent it...

Not hard at all when you pay a mechanic. The box needed to be split to swap out the input shaft anyway so no real extra cost. I also had the transfer case bearings done while they were in there. I wanted to go the part time route but the Center...

Maybe he was at his Wits End.

Latest info on Steve. Unfortunately it looks like he got hooked on heroine and that may have contributied to his..... Well.... Falling off a cliff from a moral standpoint. I hope he gets the help he needs and turns his life around. Lindon Land...

So you apparently missed the new thread someone created for you consolidating all of those threads. Bumping all the threads just pushes everything current off the front page and might cause someone else to miss a relevant post about another vendor.

Every item on sale sitewide 15% to 20% off**. The warmer weather is the absolute best time to treat your vehicle with Woolwax™. Enter promo code "July425" at checkout. https://sh1.sendinblue.com/ah4x4gkfwlpfe.html?t=1751035792871

Never run your battery down while winching again! This will pull forever if there's fuel in the tank and the motor's running. Pretty rare factory option, never offered at all in the USA. LC80’s with PTO sometimes show up in Europe, but I’m not...

Sorry for the delay in response, I turned off email notifications from Mud. The ETC ended up calling me out of the blue and giving me the form after reviewing documentation I emailed over in google doc form. I am not exactly sure what led them...