CruiserDave

5 gallons

Here's how they look with 315/75/16 tires and icon 3" lift.

Funny you guys are saying you would take a 1hdt over a 3.0. I’d beg to differ. I drove the 1hdt across country to Moab. And it was miserable and that was just on 33s. It struggled through the mountain passes in Colorado and that was with the...

DC always goes on the TC.

Clean your air filter also, easy step to insure your getting the maximum amount of oxygen.

I believe Seiken is discontinuing the 80 series booster. If so anyone who wants one better purchase them soon.

Step # 1 - Start vehicle let it run for a min turn vehicle off step on brake pedal several times till pedal is hard to push ( this means you’ve exhausted all the stored vacuum in the booster ) step # 2 - with foot on hard brake pedal start...

City racer has good reviews from some of the 40 series guys.https://www.cityracerllc.com/collections/land-cruiser-80-series/products/brake-booster-for-93-to-97-land-cruiser-fzj80-fj80-lexus-lx450

When I recently redid all my brake components,less booster, my front right caliper was seized. The feel was soft sinking pedal and a pull to the opposite side. Tightening the front wheel bearings and replacing all calipers, lines and master...

Stiff pedal with poor braking is probably going to be the brake booster or the valve in the brake booster.

Just fill it until it comes out the fill port like normal. I wouldn't think it makes any difference part time or not.

Use one or the other if you don't want to shave your radius arms some.

Well we have all these comments after their installs, but no part numbers!!

It has an aggressive cam with noticeable lope. No fall from the brake pedal after trying your suggestion...so just manual brakes. I was able to use a vacuum gauge and identify the engine pull only surpasses 15in/Hg at 3500RPM, generally idling...

Looks like factory height spring set.

https://store.arbusa.com/rear-coil-spring-set-2912/

Easier if you took a photo of your heater valve on the firewall and post it here.

I would make sure the window glass is adjusted to spec before installing the rocket. I think the guy in the video adjusted glass and installed new runs judging by how smoothly that window opened and closed. I’ve had my rear glass pull out of...

You've done everything I would do. Sounds like you were quick to disassemble and dry everything out. If it was fresh water I'd bet it would start up first try. Just keep a fire extinguisher handy. This guy has a video series of a Silverado that...

Do a search...been covered tons on here already. 'whats your budget and what is your goal for your rig?

Changing the window runs fixed all my slow window movement in any weather. They operate fine now and I don't feel they need extra speed. But it's cool someone is still making new things for these vehicles.

Here is my 95 with Dobinson 1.5” lift springs, Fox 2.0s and kenda MT2 315/75/16 on Vision Soft 8 16x8 0 offset wheels. Recently added a winch and removed the front bumper.

315/75/16 D-Tracs Dobinsons 3" Heavy Lift

OME J front and non-J rear springs. Toyo A/T 35x12.5

285s on Dobinson stock height and Tokicos.