Fitted later fuel and temp gauges to 69 to get everything reading as it should, swapped out the mags on the 72 for some 15 inch Toyota steels with 31s. They ride much nicer than the 235/85-16s, doesn't feel like my back is the last link in the...
Patch panel is now sanded to shape and I've made the repair for the gutter rust. I used 19ga steel for this, as I'm not stretching it thinner there's no need to start thick. I micced a few panels before I started and found the outside of an FJ...
Find a local club to meet and greet, you will be welcome there, take some photos when you go and ask if there is anyone around who knows these motors, You may have an F engine unless someone upgraded it to a 2F. Sometimes 2F's are cheap enough...
I have a 24v signal relay that is no longer working, Is there a fix or can we hook up 2 cheap 12 volt relays to do the job. Thinking not but perhaps someone has repaired or found an option ???
Buongiorno a tutti, ho un BJ42 ormai quasi finito, ho apportato qualche miglioria e spero di poterci fare molte escursioni nei prossimi mesi.
Spero di poter imparare molto da voi che avete molta più esperienza di me con questi stupendi mezzi e...
Got the SOA done this weekend and tried to swap the front springs to a set of 4" SUA springs. Well the higher lift springs are also longer than the OME springs and the shackle rests on the frame, so no spring action. For now I pulled a couple...
It's been a while since I've updated this thread. I wish I could say that means I got tons done, but not really. I bought an 80 series and did a ton of work to that which ate up some time.
The brown 80 is not mine, I'm car sitting.
I figured...