Azca

Yes it will reduce your caster. But the caster angle isn't all that great, IIRC its only 1.5* and it's "measureable" off the top cap of the knuckle bearing if you are careful. The Drive line angle is also important and if not correct will cause...

Pinon must rotate up. Wont going back closer to stock kill the caster?

Unfortunately, the arms are long gone. I sent an email into @Delta VS Friday, but they must be busy.

Ladies and Gentlemen, After lifting I had a drivline vibration on decel. So, went to Mr. Landtank and ordered a front DC shaft. Installed the shaft and now the growl is ever present and tad louder. So, below are the specs and what I am running...

Catch can went in

Finally installed

Alright! A man after my own heart who’s not afraid of getting a bit of blood on his tailgate and rear cargo area carpets😂😂😂. Congratulations on a successful hunt!

Wasn’t a fan of the LED taillights that came with my LC plus the lenses were scratched up so I finally replaced them.

Finally dove in and replaced front rotors, calipers, and re-packed bearings. Went with OE Refurbished Calipers - as luck would have it one of them was not correct, will have to wait another week for the replacement to arrive. Even with, one old...

In the picture in question I just made winch hill one on Fordyce trail without winching, body damage or breakage and all you can think of is a rucksack. 🤷‍♂️ their actually called a trasharoo 😉 My 80 is a no frills all business trail rig made to...

Still running around Utah. I lost a center cap so if anyone has one (especially in the Moab area) let me know please 🙏

Finished a week of elk hunting

The usual, I guess?

Hit Fordyce 😎

Love the product, significant improvement. Thank you for a job well done!

Designing products is never boring. I've turned a page in Window Rocket kit development for all non-ABS cruisers and before I toss out all the prototypes and "almost products", I thought it would be interesting to display all the iterations that...

Fresh batch of hardware back from the zinc platers! Enough to build a couple engines.

Hid away from people...

I had a local upholstery shop recently recover mine. It was more expensive than I had hoped, but they turned out great and they even ordered the leather from Katzkin to match my recovered 40th anniv seats. Unfortunately they needed to...

The copilot is a big fan of the 250. Great for naps.

😎🤙 Cheers

Some more shenanigans on the mtn, as usual night mode is always fun.

80 was dropped off for paint correction and ceramic coating. Check out that transformation so far! 😮 30 years of oxidation going away on the OG single stage white.

Got done with “phase one” of my drawer system. The space in the back is for a second battery that will be coming soon ish. Of course after everything was assembled and in the truck I realized I mounted the drawer slide mirrored. And after...

Camping and looking for elk. Did about 60 miles of dirt and ended up going down a gnarly trail to get off the mtn. I should have stopped to get better photos of some of the obstacles but I was dealing with a hangover from hell 🤣 🤣 🤣 🤣