Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Haven’t posted in a bit.
View attachment 3233628
View attachment 3233629
Finally found a tree back in Dec. I did 3 weekend days back to back. But we managed to find something in the rain.
Just been driving Steve and enjoy it.
Went into work to do some stuff on Saturday. Pulled the CVT Mt. Hood and did an OEM rack delete.
Saudi Spec Steve!
View attachment 3233632
Would be cool to have the 1HDFTE and 5 speed to match!
View attachment 3233635
Rack delete is to get the Tent mounted lower and better to the roof.
I’m going to be running an ARB Baserack mounting kit and will use 1 x 3 10 series extrusions to cross the span and mount the tent to it.
It should result in a really low profile set-up that will be able to also run the base rack wind deflector and I think ARB slimline light bar.
Would be very low profile as the tent would mount at the height that the Baserack platform does.
Waiting on extrusions so will hopefully update in the next week.
View attachment 3233656
View attachment 3259496
View attachment 3259497
View attachment 3259498
I made some straps around the extrusion to hold the tent down.
Little more fine tuning and think this will be perfect.
Nook,
Did you try adding a third extrusion in the middle location or is there not enough clearance?
Awesome, thanks for the reply. I cant decide if i want to run the extrusions below the mounts like you have them (I love the low profile) or build my own rack out of the 1"x3" extrusions and the quarter-round pieces on the perimeter and mount it on top of the Base kit rails. Decisions....I have been running just 2x. You might be able to fit a third one if you use this profile. It might be too close to the arc of the roofline. But I have not measure to see.
If I were to do it again I would use this profile and not space out the mounting feet on the front with washers to add height for additional extrusion clearance on the roofline.
Order two for front and back. Then you can measure to see if you have clearance for the middle third.
All that said. It has been incredibly solid and stable with the 2 extrusion bars.