Hello everyone. I'm in need of some idea's please.
2004 Land Cruiser, drivers window goes down just fine, will not go back up until it feels like it. Sometimes opening and closing the door makes it work, other times not.
All other windows work perfect from that switch.
Pulled the master control switch panel, took it apart to clean the contacts, there are not any to get dirty.
Ordered new switch, plug it in, the light on the master (drivers window) switch blinks twice, pause, repeat.
Stopped blinking, window works perfect up and down. Then nothing but the blinking light again.
No other windows work, put old switch back in, all other windows work perfect, drivers is the same as before, perfect going down, won't go back up.
I did the loss of power reset the windows trick and still nothing with the new switch, but old switch works except for the drivers window.
I have NOT checked fuses as all windows work and the drivers only works intermittently. I am going to check the wiring inside the rubber grommet tomorrow after I do a oil change.
I found this thread but there is no conclusion to it.
Power window master switch not working - can't close window
Any other ideas?
2004 Land Cruiser, drivers window goes down just fine, will not go back up until it feels like it. Sometimes opening and closing the door makes it work, other times not.
All other windows work perfect from that switch.
Pulled the master control switch panel, took it apart to clean the contacts, there are not any to get dirty.
Ordered new switch, plug it in, the light on the master (drivers window) switch blinks twice, pause, repeat.
Stopped blinking, window works perfect up and down. Then nothing but the blinking light again.
No other windows work, put old switch back in, all other windows work perfect, drivers is the same as before, perfect going down, won't go back up.
I did the loss of power reset the windows trick and still nothing with the new switch, but old switch works except for the drivers window.
I have NOT checked fuses as all windows work and the drivers only works intermittently. I am going to check the wiring inside the rubber grommet tomorrow after I do a oil change.
I found this thread but there is no conclusion to it.
Power window master switch not working - can't close window
Any other ideas?