http://westslope.craigslist.org/cto/4216859166.html
Not mine and don't know them. just thought it might be a good deal for someone
FJ40 | BJ40
Classifieds: Toyota 40-series Land Cruiser
Filter by prefix:
.
Filters
rolling chassis with extras, 1973 FJ40 Tub and Frame: Comes with (2) 3 speed Transmissions (1 Vacuum Shift x-fer case and 1 Downey converted floor shift with shift x-fercase) 2f Engine (unknow condition never ran it went chevy on my other cruiser needs minfold and carb too), Stock axels Front and Rear (Not SOA), Stock gas tank, stock roll bar and Windshield Frame and Hood and a set of fenders and aprons. Does not include Doors**, Hard or Soft top, or tailgate.
**I have a set of Half Door that are cut and welded and built to except soft top uppers (has bestop soft upper on them) also has new lock/latches mech on it (retail around 35 a piece from Cool Cruisers) unfinished (needs finishing, metal filler and sanding etc)for sale for...
I have a 1978 Toyota fj40 land cruiser. FJ runs and drivers with the stock straight six engine in it. Has disc front brakes and 4 speed manual transmission in it. Everything works on the fJ wipers blower motor etc. Comes with following not in picture, extra frame with title small block 350 complete 4 speed manual trans mounted behind it and np205 t-case. this engine trans and t-case have all the mounts welded into the spare frame and is a flat belly set up. I also have some parts for the straight 6 engine that come with it. Header smog delete kit egr delete kit extra intake and carb power steering set up. Located in Blanchester Ohio if you have any question feel free to call 602 908 6024 NOT LOOKING FOR ANY TRADES AT THIS TIME. Asking...
1969 Toyota FJ40 Truggy aka the “Meanie”
Originally built by Profitt’s Cruisers, the rig has been updated and substantially modified by Redline Cruisers in Colorado Springs, CO.
Under the hood it has a Chevy 5.3 LS V8 engine with multi point fuel injection and an aluminum dual core radiator with twin electric cooling fans. It has a custom ECM programmed just for this rig and it starts instantly and runs perfectly at all elevations. New battery. It also has a new Turbo Hydro 400 automatic transmission mated to an Advanced Adaptors twin stick 4:1 transfer case. It has HD constant velocity drive shafts using Spicer U-joints attached to GM 1 ton axles. The T-case has a HD cross member and skid plate. The rig has a turbo style exhaust system...
I've got a completely fiberglass FJ40 for sale.
one piece front end
complete Chevy drivetrain (crate 350, turbo 350, 208 t case)
edlebrock carb
aluminum fuel cell that mounts under rear bed area
lokar shifter
exhaust is fully ceramic coated all the way back
painless wiring harness
autometer phantom gauges
custom steering column
comes with 4 leather audi seats
17" rims
GM power steering conversion
round eyes HID headlights
truck needs to be final assembled, 90% of everything you need to finish it is here.
has a clean title
My father and I bought this truck as it is, he's had multiple back surgeries since and we have no time to work on it. so it needs to go.
PM me for more pics and more info.
we'll take $7500 or best offer
Sadly I need to sell MY FJ40. Just got a 1997 FZJ80 and need to make room. HOA is on my case for parking a car outside. I'll make a fair deal.
http://tucson.craigslist.org/cto/4197597837.html
Like the title says I'm looking to buy my first FJ40 - found this locally and would like to get some advice on potential issues, watch points, estimated value and so on.
A little on what I'm looking for: a reliable daily driver, needs to climb up to the ski resort I work at (7' for 15miles) '77 Land Rover 88II with a 2.5l crawled up it at 30mph - never again. I am willing to do basic work and cosmetic work - anything major and it'll be a first, not looking to do full restoration job (I'm not a purist - not yet anyway), but project work is fine.
I've not seen it yet and would like your opinion, just need to know what I should be looking for / asking when I go have a look.
Thanks in advance for any help.
BELOW IS ALL THE...
Here is my 1977 Fj40 It has a small lift, Fresh 350 , I am the 3rd owner. It is in great shape but is not perfect, Runs awesome has Gear splitter overdrive. Runs 65 mph all day. text with questions 435-632-8404
I am considering selling my 40. The build has been well documented in this thread.
https://forum.ih8mud.com/40-55-series-tech/547003-project-duragoat-my-1974-fj40-build-thread.html
There are a few additional details that I could fill you in on as well. Rear swing out is complete, haven't had time to update the post.
let me know if you want to talk details.
I am right around $20k on the price.
Please PM if interested.
Highlights:
5.3L swap
H55
ARB Locker + onboard Air
Power steering conversion
Disc Brake conversion
Plus lots more
thanks,
brian
1973 FJ40, all complete, F six cylinder with 3 speed, all original except shackles and added aux fuel tank. I started this project but don't have time to finish it. I purchased lots of parts that were needed and just don't have the time. It has some cancer but all the parts are available to repair it. This would be a good restoration project or stick a V8 in it. It does not have a top but I do have full doors with good glass. The majority of it is original paint. Registration is current and its smog exempt. It runs decent and is drivable yet not street legal due to lights need some work. Too much more to list so call with serious interest.
Asking $3000 obo
Call 805- eight O six- 0 two 1 zero
or email j.price64@yahoo.com
or see at...
1970 Toyota FJ40 Land Cruiser. Beautiful paint original Cruiser color Olive Drab Brown. Chevy 350. 3 speed. 33" pro comps. Highjacker shocks. Stereo with CD and front and rear speakers. Hard top, full soft top, bikini top. Bucket seats in front and bench in back. Runs strong and great shape.
People love this Land Crusier and it gets a lot of attention wherever you go. It looks great and is the strongest and tightest truck you will find in this price range.
Please no low ball offers or trades.
paulrgates@gmail.com
I am looking for a father/son "project" for my sons first car. I had a great 78 some years ago that I was planning on keeping for him but had to sell for financial reasons. I am now looking for something that doesn't need much body work if any at all (any paint condition is fine). Ideally stock 6 but a 350 conversion could work. Really something we can work on together over the next year and then customize together once he turns 16. Location near Houston would be ideal and budget is 6-7k but could go higher if basically ready to go except customization (like lift/interior etc). Thanks.
Hi Guys, one of our clients has decided to sell his 12HT converted FJ40. New low price is $24,000, feel free to email us or PM for more info.
Here's a brief description of the work we did to it:
12HT diesel engine installed last year, engine had 250k km's on the clock when we removed it from a 1989 HJ61 half cut
H55F transmission was installed, originally from Toyota dealer bought brand new
New clutch and rear main seal, machined flywheel, etc
Engine was torn down to long block and re-sealed, new belts, water pump, paint, etc with all OEM parts
Rebuilt turbo
Ceramic coated turbo exhaust housing and exhaust manifold
Cleaned and painted block and accessories
Added 2nd alternator for extra electrical system
Rebuilt and re-wound 24...
I knew I would do this.. I can't let her go now so going on hold on to her a bit longer.
- Locked
This was an old hunting rig modified to carry a quad on the back, neat rig, runs great, drives fine, brakes work but sticky, pto works, lights work, comes with clean oregon title, make a great hunting or ranch rig! $1600 located in california bay area! Thanks
I live in Arizona and I need to sell my '67 FJ40. I have no room for it and will be sad to see it go.
Year: 1967
Make: Toyota
Model: Land Cruiser
Cylinders: 6
Engine Type: F2
Transmission: Manual 3 Spd
For Sale By: Private Seller
Vehicle Title: Clear no lean
Fuel Type: Gasoline
Drive Type: 4X4
Mileage: Approx. 50k on 1976 FJ40 Rebuilt Engine
Exterior Color: White - Original
Interior Color: Black - Original
Asking Price: $11,000(Reduced)
Condition:
Runs and Drives Great
This is a high desert California and Arizona FJ...
Im currently looking at this car for purchase...I ask the MUD experts to give me an idea of what its worth...
Seller did not do any work on it just bought it and decided it wasn't for him.
1977 FJ40 350 turbo 400 conversion with 4 wheel disc and power steering.
Has a lift...dont know by whom or how much..has some issues as per the below report.
https://www.carchex.com/inspect/report/Default.aspx?Type=B&orderid=131547&key=f486faf928f6f6e80987d67fa82c9a202406e07c
again Im not selling...Im looking for advice on whats is worth because Im looking to buy it.
No affiliation, just spotted the ad on craigslist
https://fresno.craigslist.org/cto/4144784108.html
Ok, ok, I guess I'll officially throw this out there. Just some brief back story. I've been a member for awhile although I don't post much, just spend a lot of time drooling over everyone else's rig. I'm a Toyota fanatic having owned a Tacoma, FJ Cruiser, 2 4runners, Sion and a Prius :D. I have loved the FJ40 since seeing one at a bank several years ago but always figured they were more than my budget could afford as the only ones I found were pristine and expensive!
So fast forward to today I'm back on the search. I'm not looking for a perfect show truck or a rock crawler. I'm looking for something mechanically sound that could be a daily driver with an occasional trip to some green trails or camping trip. I'm a handy self...
http://www.ebay.com/itm/Toyota-Land-Cruiser-Black-and-Tan/261321231768?_trksid=p2045573.m2042&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D27%26meid%3D2447253525225270639%26pid%3D100033%26prg%3D1011%26rk%3D1%26rkt%3D4%26sd%3D261321231768%26
Gentlemen: I've been in search of my first 40 for a good while now, but this one seems to keep catching my eye on ebay. I first saw it listed out of the Rockies (CO), then in a few months it popped up out of NE Arkansas, and now it's in the Tulsa area and has ran the course of several, reserve not met, auction listings. In the most recent, I believe it was bid in excess of 20 grand:hhmm:
Looked like a damn stout bid to me, but anyway I really like the look of it, and would like to...
Long story short: Had this rig since 2008, drove as my daily for 2 years then moved back home to Colorado for 6 months, and abruptly moved to Chicago, hence Cruiser has been in storage for the last 3 years. Last started up in January when I was back in town and ran fine (will need a carb adjustment and new batteries along with the usual freshening up. Truck is still garaged in Colorado and I've realized I won't move back anytime soon, thus am putting back on the market. Has a CA title (never changed plates when I got to CO) and has current California Non-Op registration.
First the bad: basically just some minor body stuff. Has some bondo on both fenders (previous owner), little bit on the front of the hood and I think a bit...
It isn't mine, but this thing is pretty kickass.
http://tulsa.craigslist.org/cto/4168872097.html
Sent from my iPhone using IH8MUD
Truck is located in Greenwood SC:
craigs ad with pics:
http://greenville.craigslist.org/cto/4156470547.html
This truck can be had several different ways.
I will sell it as is with EVERY part I have as follows for 5k
Complete fj40 with custom cage, bumpers, winch mount, DOM sliders, Custom crusher corners, poly gas tank, 2f engine with weber carb, header, pertronix electronic ignition, gm 1 wire alternator, aussie lockers front and rear. 35x12.50 BFG KM2 mud terrains.
I also have a fuel injected 350 with gm sm420 4 speed granny trans and 3 speed cruiser case. This is a serpentine belt engine with all accessories. It has the harness cut and computer setup for the FJ40. The setup came out of another daily driven cruiser...
Hey guys - I am on the very tail end of parting out this 1974 FJ40 and it is time to put the rolling chassis up for sale. I have gone thru the PO's stack of receipts (I will provide them to the buyer) and it appears he has done the following:
Sandblasting and primer of the frame and axle housings
Possible POR15 of the frame (or he just bought the supplies)
Possible rebuild of steering arm and hubs (rebuild kits were purchased from TPI 4x4)
New shackles
New tie rod kit
The rolling chassis is still at the PO's storage so I have not been able to go thru the frame and or other components too thoroughly. I will have it hauled to my mechanic's shop this upcoming week.
What is included:
1974 FJ40 frame with valid TN title
Front and rear...
Thread Filter
Latest posts
-
-
-
-
-
Transfer Case Rebuild & Modification (High & Low Range Gears and Part-Time 4wd Kit) (3 Viewers)
- Latest: MVZ
-
-
-
-
-
-
-
-
-
-
