Hello all. I purchased my '92 'Cruiser with 159,xxx miles in August. I found this site after my purchase
and read up on some good info and found out I needed to do more than just change the oil. Ordered some parts from cdan and a few other vendors here and the old beast runs great!
I am leaving on a 3500-4000 mile, 3 week journey Oct. 26. PA-MS-FL-PA. I plan on camping the whole way and driving part of the Blue Ridge Pkwy, Natchez trace, plus some other cool spots. I will be towing a small trailer to pick up some stuff I have in FL in storage. I will update this thread with my successful, trouble free voyage
o) and pics too.
Below is what has been done by me...with a little help from my friend and
-
- valve cover gasket(oem)
- changed oil/ oil filter(oem + castol syn)
- rad flush refilled with red + tstat(oem)
- spark plugs(oem)
- wires(oem)
- dizzy cap(oem)
- rotor(oem)
- air filter(oem)
- fuel filter(oem)
- new belts(oem + gates)
- full desmog
- tailpipe(bosal)
- complete front end overhaul with new longer birfs & drive plates(oem + ringpinion.biz birfs/d plates)
- wheel bearings(auto-zone)
- re route diff breathers
- make center armrest elbow thing (i am very happy with this)
- synthetic gear oil in diffs & tc(castrol)
- some welding here and there
- rattle can flat black wheels
- something else I am forgetting?
Thank all you guys/gals for a wealth of information!!

I am leaving on a 3500-4000 mile, 3 week journey Oct. 26. PA-MS-FL-PA. I plan on camping the whole way and driving part of the Blue Ridge Pkwy, Natchez trace, plus some other cool spots. I will be towing a small trailer to pick up some stuff I have in FL in storage. I will update this thread with my successful, trouble free voyage

Below is what has been done by me...with a little help from my friend and

- valve cover gasket(oem)
- changed oil/ oil filter(oem + castol syn)
- rad flush refilled with red + tstat(oem)
- spark plugs(oem)
- wires(oem)
- dizzy cap(oem)
- rotor(oem)
- air filter(oem)
- fuel filter(oem)
- new belts(oem + gates)
- full desmog
- tailpipe(bosal)
- complete front end overhaul with new longer birfs & drive plates(oem + ringpinion.biz birfs/d plates)
- wheel bearings(auto-zone)
- re route diff breathers
- make center armrest elbow thing (i am very happy with this)
- synthetic gear oil in diffs & tc(castrol)
- some welding here and there
- rattle can flat black wheels
- something else I am forgetting?
Thank all you guys/gals for a wealth of information!!




Last edited: