Yota1 Gasket kit (2 Viewers)

[John Mc]

Has anyone had experience with Yota1's complete gasket kit? It's supposed to be equivalent to Toyota 04111-66036. I think I'm going to have to rebuild my sons 94 and looking for ways to reduce cost without compromising quality. 1FZ-FE 4.5L Complete Gasket Set 1993-1997 Toyota Land Cruiser - Yota1 Performance, Inc. - https://209yota1.com/products/cylinder-head-gasket-set-1fz-fe-4-5l-1993-1997-toyota-landcruiser-copy/

 

[Fj80oregon]

Just buy the OEM $328 shipped then you don’t have to worry about quality. This is not something you want to save on inferior parts and re do it down the road possibly.

https://partsouq.com/en/catalog/genuine/unit?c=TOYOTA00&ssd=%24%2AKwFOemsPBk5XERI6EglTYhYCIiU7AhM6AwdfFUZfIFlQXxlaHxpKAggTHzwGWBtMTxVGTFZZGhQeWh8JBk1NSVlQXxMWBxEVTUxDSElIWAVbXV4YPQFZHx5YQgUJAEVMSU9MX1ZYB0JDXkdaWSw8KDloCRtcXxcYXkdaWmNxfURNKFY7Mzc2bnoVUF1YDR9fQFhLXlsQUVpZGhQeWh8LA0QAAAAAAOo4sJA%3D%24&vid=0&cid=1&uid=412374&q=&srsltid=AfmBOoqgxSKJmIZjFHivIpXrS4sBn6a7978PrdKdf3RKZDuxN9i65X7Y

 

[OGBeno]

Run it.

 

[John Mc]

Just buy the OEM $328 shipped then you don’t have to worry about quality. This is not something you want to save on inferior parts and re do it down the road possibly.

https://partsouq.com/en/catalog/genuine/unit?c=TOYOTA00&ssd=%24%2AKwFOemsPBk5XERI6EglTYhYCIiU7AhM6AwdfFUZfIFlQXxlaHxpKAggTHzwGWBtMTxVGTFZZGhQeWh8JBk1NSVlQXxMWBxEVTUxDSElIWAVbXV4YPQFZHx5YQgUJAEVMSU9MX1ZYB0JDXkdaWSw8KDloCRtcXxcYXkdaWmNxfURNKFY7Mzc2bnoVUF1YDR9fQFhLXlsQUVpZGhQeWh8LA0QAAAAAAOo4sJA%3D%24&vid=0&cid=1&uid=412374&q=&srsltid=AfmBOoqgxSKJmIZjFHivIpXrS4sBn6a7978PrdKdf3RKZDuxN9i65X7Y

I've never used this site—thanks for the link! Do you know if the short blocks are the same between a '94 and a '97? I'm thinking about buying a running engine for our 1994 just to get it back on the road quickly. Then I could rebuild it at my leisure to eventually replace the high-mileage engine in my '97, which has over 470,000 miles and is still going strong.

 

[OGBeno]

I've never used this site—thanks for the link! Do you know if the short blocks are the same between a '94 and a '97? I'm thinking about buying a running engine for our 1994 just to get it back on the road quickly. Then I could rebuild it at my leisure to eventually replace the high-mileage engine in my '97, which has over 470,000 miles and is still going strong.

Yes.

11400-66041

 

[John Mc]

Yes.

11400-66041

Thanks for confirming. Makes me feel better about my decisions.

 

[BTLSHP]

Just recall we are in the post de minimus exemption era.....

It is not the duties that will get you, it is the tack on handling fees.

 

[Batameez]

Previous owner of my 80 used the Ishino suite of gaskets to do the head gasket in 2014. It still runs good. If I had to do it myself I'd just go OEM if it isn't much more, but there's plenty of other factors involved in an engine overhaul that will contribute to the longevity of it as well.