Winter Projects (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

retrofive

rɛtrəʊ
SILVER Star
Joined
Jan 6, 2008
Threads
300
Messages
15,398
Location
swfl
Now that summer wheeling season is sorta done time to fix up the truck.

Here is my short list :)
Swap front LCA arms to return back to stock bushings
Install MT caster plates on the soon new to me LCAs
Replace all the TRE's
Fix alignment
Extend brake and breather lines
Fix rear axel seal

THe want to do list but not as critical:
More power (cig/usb)
Re-route sub power and add power dist in the rear caro
Copy Matt's lighting ;)


:hmm:

Just some stuff. What are your plans?
 
Now that summer wheeling season is sorta done time to fix up the truck.

Here is my short list :)
Swap front LCA arms to return back to stock bushings DONE
Install MT caster plates on the soon new to me LCAs DONE W/ LAND TANKS
Replace all the TRE's GOT NEW ONES IN GARAGE, NEED TO INSTALL
Fix alignment ALIGN AFTER I INSTALL MY TRE'S
Extend brake and breather lines DONE
Fix rear axel seal REPLACED MINE WHEN REGEARED

THe want to do list but not as critical:
More power (cig/usb) HMMH, WILL WAIT FOR YOU TO DO IT
Re-route sub power and add power dist in the rear caro WILL WAIT FOR YOU ON THIS TOO
Copy Matt's lighting ;) DIDN'T SEE IT YET

HAM HAM HAM HAM HAM AND I'M NOT TALKING DINNER :D


:hmm:

Just some stuff. What are your plans?

See my list attached to Ty's
 
This thread seems exclusive! Screw you guys!!! :flipoff2:

Ok, my long distance winter plans are to get rings for my bead-lock rims made. Find some tires to put on said rims.... make plans for rear bumper/side armor.... Probably some other things...

I <3 u
 
This thread seems exclusive! Screw you guys!!! :flipoff2:

Ok, my long distance winter plans are to get rings for my bead-lock rims made. Find some tires to put on said rims.... make plans for rear bumper/side armor.... Probably some other things...

It also seems biased to 80's needing work. :flipoff2:

Install 5.29s
Rear bumper moved eight more inches forward ;)
Rear axle seals(this weekend)
Modify rear axleshaft
MOAR light!!
Lower front end slightly
Swap LCA's

And this little issue of everything turbo related I need now sitting in the shop other than head studs and gasket...
 
In other news. Anybody looking for 94 80, im taking the locked axles so it will have a open front and aussie rear. 2.5k roughly.
 
part it.

how much for the axles?
Haven't got that far yet ;)


all said and done I will get locked axeles, and have either my set axels (open front/aussie rear) or open/open.

Whatever works out best for all involved.
 
I'm still trying to figure out what I'm going put on my summer list..

I have exhaust stuff if you need it Ty.. LMK..
 
I'm still trying to figure out what I'm going put on my summer list..

I have exhaust stuff if you need it Ty.. LMK..

Thanks! I may need some.
 
I still have the system out of my project- I won't be using that, only might need the muffler but can let that go too if you need it. You'll just need to get the gaskets for the bolt up flanges.
 
I still have the system out of my project- I won't be using that, only might need the muffler but can let that go too if you need it. You'll just need to get the gaskets for the bolt up flanges.

Cool.dont need the muffler, thinking i will put a magflow on. My cats are fine being protected. The rest is pretty smashed and only a few hangers holding now.
 
Random bump;

Thanks Knoll, Matt and gnob for help getting my PS pump rebuilt and installed. Back on the road again. SO NICE>
 
It has also been brought to my attention I need a new battery :flipoff2:

And all that oil everywhere in the engine bay IS strategically place RUST PREVENTION! It's a complex system I won't bore you with the details of. :hillbilly:
 
It has also been brought to my attention I need a new battery :flipoff2:

And all that oil everywhere in the engine bay IS strategically place RUST PREVENTION! It's a complex system I won't bore you with the details of. :hillbilly:

I've had good results with the "Econopower" batt's @ Interstate- they usually are $35 to $50 and sometimes they have been as good as new- I have also picked up some Optima's there- you just have to ask.. (Reverse terminals are sometimes hard to get)
 
I've had good results with the "Econopower" batt's @ Interstate- they usually are $35 to $50 and sometimes they have been as good as new- I have also picked up some Optima's there- you just have to ask.. (Reverse terminals are sometimes hard to get)


Ya, was planning on running down to the interstate place here in CP on hwy99.
 

Users who are viewing this thread

Back
Top Bottom