Will 1st Gen Tacoma Wheels Fit An LX450/FZJ80?

[LFD2037]

Does a 1st gen Tacoma have the same bolt pattern and hub size as an LX450/FZJ80? Thanks.

 

[-Spike-]

Got pics?

EDIT- Here's a good resource for wheels- Reference guide for car wheel and tire dimensions such as size, offset, PCD

Look up the vehicle, and compare the specs. You'd almost certainly need to use a spacer on any non-stock wheel.

 

[LFD2037]

Pics of what?

I'm wanting to buy new tires and wheels for my LX450 but wanting to make sure they'll fit on a 1st gen Tacoma when I get one. Thanks.

 

[-Spike-]

I thought you had a set that you were considering, if so, pics would have helped to find specs on them.

Another resource I use to see pics of wheels, and some size info (not as comprehensive on specs as the aforementioned site) is Hubcap Haven

There were 5 lug and six lug Tacomas, so hard to answer the question without more info.

 

[LFD2037]

It will be a 6 lug Tacoma.

 

[inkpot]

Every set of Taco 17" wheels we have installed onto 80 series have required 1-1.5" spacers.

 

[LFD2037]

After digging around the web, I found the answer. The LX450 wheels will fit on a 1st gen Tacoma but not vice-versa.
LX450/FZJ80 is 6x139.7mm (6x5.5) with a 108mm center bore.
1st gen Tacoma 4WD is 6x139.7mm (6x5.5) with a 106 center bore.
These rings can be used to make it hub centric:
spigot rings - 108.0 mm -> 106.0 mm - HubCentric-Rings.com

Thanks.