Who's going to be the first to mod their 200?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

christo,
nice buildup, have you seen the 4th gen 4Runner rear bumpers? They are tackling the same issue on the wings. 4x4Labs, CBI offroad, and some homebrew solutions for the wings.

here is one of the cleaner ones- homemade reusing the plastic
"Crozfab" rear bumper - Toyota 120 Platforms Forum
 
For now we are waiting for an ARB for the front.

Other option I thought also require some extensive metal sheets to cover all stuff that the factory front bumper " cover "

I saw in the ARB mothntly pdf the ARB front bumper for Sequoia .. pretty close to the 200 series front ..
 
christo,
nice buildup, have you seen the 4th gen 4Runner rear bumpers? They are tackling the same issue on the wings. 4x4Labs, CBI offroad, and some homebrew solutions for the wings.

here is one of the cleaner ones- homemade reusing the plastic
"Crozfab" rear bumper - Toyota 120 Platforms Forum

Thanks for the link. We spent today cutting up the bumper and it actually came out pretty good.
 
WOW! Great works as usual Christo. Can't wait to see this baby in person.
 
Christo,

Are you using the four holes in the bumper to relocate the PDC? That might come in handy for wheeling.;p
 
Sliders installed. They will soon be on the site for sale. Introduction Price is $915. As shown it has an optional stainless steel step.

The step part deck plate is now bolt on. It will either be coated with textured powder coating, or optionally you can get a stainless piece. The price is for the regular steel powder coated step.

2"x3" rectangular tube with 1.75" DOM outrigger. The slider is a bolt on using existing holes in the frame. Some rivetnuts needs to be installed. A rivetnut tool and drillbit can be supplied for $75.

200_slider_1.jpg


This shows one of the mounting pads. The slider has two mounting pads that attach to the frame and a total of three legs per slider.

200_slider_2.jpg


Available in 2-3 weeks.
 
Last edited:
Sliders installed. They will soon be on the site for sale. Introduction Price is $915. As shown it has an optional stainless steel step.

The step part deck plate is now bolt on. It will either be coated with textured powder coating, or optionally you can get a stainless piece. The price is for the regular steel powder coated step.

2"x3" rectangular tube with 1.75" DOM outrigger. The slider is a bolt on using existing holes in the frame. Some rivetnuts needs to be installed. A rivetnut tool and drillbit can be supplied for $75.

200_slider_1.jpg


This shows one of the mounting pads. The slider has two mounting pads that attach to the frame and a total of three legs per slider.

200_slider_2.jpg


Available in 2-3 weeks.

Sick.
 
Sliders installed. They will soon be on the site for sale. Introduction Price is $915. As shown it has an optional stainless steel step.

The step part deck plate is now bolt on. It will either be coated with textured powder coating, or optionally you can get a stainless piece. The price is for the regular steel powder coated step.

2"x3" rectangular tube with 1.75" DOM outrigger. The slider is a bolt on using existing holes in the frame. Some rivetnuts needs to be installed. A rivetnut tool and drillbit can be supplied for $75.

200_slider_1.jpg


This shows one of the mounting pads. The slider has two mounting pads that attach to the frame and a total of three legs per slider.

200_slider_2.jpg


Available in 2-3 weeks.

I stopped at Slee's to pick up a few things today and had a chance to look at the 200. SWEET! The sliders are killer!
 
Nitto TG's I believe 285's.
 
Christo,
Is is conceivable to do the 80 series step sliders with the stainless? If so would they be under $1000?
 
Sliders installed. They will soon be on the site for sale. Introduction Price is $915. As shown it has an optional stainless steel step.

The step part deck plate is now bolt on. It will either be coated with textured powder coating, or optionally you can get a stainless piece. The price is for the regular steel powder coated step.

2"x3" rectangular tube with 1.75" DOM outrigger. The slider is a bolt on using existing holes in the frame. Some rivetnuts needs to be installed. A rivetnut tool and drillbit can be supplied for $75.

200_slider_1.jpg


This shows one of the mounting pads. The slider has two mounting pads that attach to the frame and a total of three legs per slider.

200_slider_2.jpg


Available in 2-3 weeks.

Can I place an advance order?
 
Christo,
Is is conceivable to do the 80 series step sliders with the stainless? If so would they be under $1000?

We are changing all SliderSteps to have a bolt on plate, so the stainless is an option, but I have to still check on cost. Those two stainless steps are not cheap. We also have to see how it works re: traction etc. For now the plan is to have the sliders coated standard black for easy touch up and then the step portion will be the existing textured coating that we use.
 
We are changing all SliderSteps to have a bolt on plate, so the stainless is an option, but I have to still check on cost. Those two stainless steps are not cheap. We also have to see how it works re: traction etc. For now the plan is to have the sliders coated standard black for easy touch up and then the step portion will be the existing textured coating that we use.

Christo,
Thanks for the info! It seems like this truck is sort-of the 'Genesis' for some really cool ideas :grinpimp: Anyways I'll be looking to buy some sliders in May or June, so I'll email Ben closer to then and see how this has progressed.
 
Last edited:

Users who are viewing this thread

Back
Top Bottom