What bolts are needed to assemble 45 LWB

[captcruiser]

Mainly concerned about cab, roof & tailgate bolts needed to put back together. Was purchased as a disassembled project.

 

[ozcrusier]

All the sizes and thread pitch are hear
http://www.ebay.com.au/itm/NUT-BOLT..._Parts_Accessories&hash=item4acdeb4541&_uhb=1

 

[CycloSteve]

OZ, that is a nice set of nuts and bolts...too bad it would cost more than the product to get it shipped stateside.



Steve

 

[ozcrusier]

shipping via sea would be the only option regarding air freight cost from OZ.

 

[Gumby]

You can do most of the bolts with a bag each of 6mm x 1.0 x 25mm bolts nuts and flat washers and a bag each of 8x1.25x25 and 8x1.25x50 bolts and nuts and flat washers. You will need a couple of 6x1.0x20 countersunk phillips for where the w/s attaches to the top frame and probably a few other various sizes here and there.

 

[kellyo]

Yes, what Gumby said.

 

[captcruiser]

You can do most of the bolts with a bag each of 6mm x 1.0 x 25mm bolts nuts and flat washers and a bag each of 8x1.25x25 and 8x1.25x50 bolts and nuts and flat washers. You will need a couple of 6x1.0x20 countersunk phillips for where the w/s attaches to the top frame and probably a few other various sizes here and there.

Thanks this is the info I was looking for ,much appreciated. Brian