What are you working on? (10 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Looking at new gears for my HDJ81. Peak torque is 1800 to 2000 rpm's. I already have 10% underdrive and 3.11 low range gears in my xfer case. I crunched the numbers, I'm trying to decide between 4.56 and 4.88. Nitro is having awesome sale so pulling the trigger on this a bit earlier than I had planned. Let me know your thoughts

20230727_071945.jpg
 
It’s it’s just for wheeling I’d go with 4.88s but knowing you drive that to NC and long highway trips. I’d say 4.56 or what you have now
 
4:56 will get you close but 4:88 will overcome the larger and heavier tires. I would go 4:88 with just 35's, so yeah, 4:88. If you think it is too much pull the 10% back out of the t-case, but I think you will be fine.
 
Last edited:
Went to start my 40 today and all the magic smoke came out! Not sure what is going on but this sucks!

IMG_9326.jpeg


IMG_9325.jpeg


IMG_9324.jpeg
 
Then I checked to see why the radiator cap had pucked out instead of going into overflow. Simple drill bit and it was good.

IMG_9323.jpeg


IMG_9322.jpeg
 
Then trailer repairs. Spent some time with the torch and a few hammers...

IMG_9329.jpeg


IMG_9330.jpeg


IMG_9331.jpeg


IMG_9332.jpeg


IMG_9333.jpeg
 
I'm decent at electrical stuff if you need help
Thanks for the offer. I hope to remove dash cluster and look behind it. Smoke came from there and then saw it under hood. Trying to get some stuff done on the 80 for the camping trip. i will get back on it soon.
 
Scored this on marketplace. When I was loading it, guy ask, " do you know what triple locked is?" I shrugged and said " might have something to do with that knob on dash?" 😎

He said people kept asking him that!

IMG_9342.jpeg


IMG_9341.jpeg


IMG_9338.jpeg
 
Just couldn’t help yourself, couldya?
Quick check on it, front support pushed in, radiator touching fan, dizzy cap broken. I think I can pull back the support and maybe just replace the radiator and dizzy cap to get it running. Will need front grille and lights. Not sure what to do with it. front seats are trashed and need to get the cobb-webs out of it. I need to think on it....
 
Anyone have a 4 1/4 or 4 1/2 hole saw for a snorkel install?? Prepping to do it soon.
 
Best beer around!


What condition is that thing in? I might know someone interested in an 80 🙃
Well I got it running today at lunch. sounds good and smooth! Needs radiator, trans cooler and a/c condensor plus front end stuff, headlamps, grill, etc
 

Users who are viewing this thread

Back
Top Bottom