Wet driver’s floorboard… (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 21, 2004
Threads
16
Messages
65
Location
Bellaire, Michigan
Question: Does the sunroof drain hose connect to an outlet at the floorboard back under the gaggle of wires? If so, how do you reconnect it? There’s no room to fit a hand in there.
I keep getting wet drivers side floor and end up blowing my brake / stop fuse.
Suggestions?

Thanks!

IMG_3134.jpeg
 
That drain hose ends there, no connection, just hangs down and the water should drip down through some openings in that rocker panel, make sure the area is squeaky clean, lay down under the area and poke the little holes left in the pinch weld with some stiff plastic wire and vacuum, and I usually spray some rust prevention wax in the area. The foam there is a rust magnet, but if left out you’ll have wind and noise coming in.

On mine, the water comes in from the windshield, probably rivets area. Waiting for a bit cooler weather to deal with the issue.
 

Users who are viewing this thread

Back
Top Bottom