This may have been posted before, but I just found it and had to share. I think we can all relate to this guy, funny as hell.
Valve Gasket Replacement - Funny
- Thread starter walleyefisher
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Funny commentary! Can't believe he skipped the PCV/grommet and spark plug seals but did the half moons?
- Joined
- Jul 20, 2004
- Threads
- 274
- Messages
- 23,205
- Location
- Chandler, AZ
- Website
- www.tontorecreationalliance.org
Agree, the spark plug seals are more important than the half moons, also only need about half that much RTV, or less. The PCV/grommet, not so much, it can be replaced anytime, with the cover on.
After doing a bunch of there can just about predict where the parts/tools are going to fall. Got lucky on the rear corner, that one often falls onto the bell house and rolls down against the wire harness, making finding/recovery a challenge. Got locking extensions to prevent tools dropping when coming out, and tape the fastener to the socket, greatly reduces the hunting for lost items entertainment.
Changed the gasket but didn't clean up anything so the engine still looks like $hit (but won't get worse).
he forgot to do the most important part of the job, crack the water control valve 
Bwahahahahahahaha This guy was 'channeling' me!! Every time I work on my LC.
Best line: "And I'm not even Drunk". hahahaha
Best line: "And I'm not even Drunk". hahahaha
