- Thread starter
- #61
Valley hybrids cruiser swap meet Stockton CA April 14th
- Thread starter orangefj45
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Collectors Items
G -
$20 for all 4 lights.
$60 for two manuals, one for engine, one for engine/chassis.
G -
$20 for all 4 lights.
$60 for two manuals, one for engine, one for engine/chassis.
Heck, after gas and the $10 I am already makin money!
More stuff Early lower door panels 125.00
Misc FJ62 heater parts ( Blowers,vent tubes ) 50.00
FJ60 Carb Fan 40.00
FJ62 Alt 50.00
Misc FJ62 heater parts ( Blowers,vent tubes ) 50.00
FJ60 Carb Fan 40.00
FJ62 Alt 50.00
I've got ...
a complete 2f with low compression in one cylinder (I heard)
a 4-speed with no top cover in good working condition when removed
a set of four stock springs from my '76, see the 'before' thread for pics with these springs installed
a set of four 15x8 center line wheels with small holes, need polishing
a pair of large pattern knuckles
a ton of other small parts, see my old for sale thread linked below
It's going to be hard for me to get over to Stockton this year. PM me if you want any of these parts to help me motivate.
a complete 2f with low compression in one cylinder (I heard)
a 4-speed with no top cover in good working condition when removed
a set of four stock springs from my '76, see the 'before' thread for pics with these springs installed
a set of four 15x8 center line wheels with small holes, need polishing
a pair of large pattern knuckles
a ton of other small parts, see my old for sale thread linked below
It's going to be hard for me to get over to Stockton this year. PM me if you want any of these parts to help me motivate.
Last edited:
- Thread starter
- #68
- Thread starter
- #70
i have two more items:
custom fj60/62 rear axle with disc brake and full floater conversion including aisin hubs. $1200
pto box for one-pieve case in good shape $175
georg
custom fj60/62 rear axle with disc brake and full floater conversion including aisin hubs. $1200
pto box for one-pieve case in good shape $175
georg
Bump and adding some more stuff:
2f crank guaranteed good, been in my garage for five years and my POs garage for 20 before me. obo
https://forum.ih8mud.com/parting-out/569084-parting-out-couple-2f-engines.html
E-locker shaft for fzj80, short side, long splines, spare or use to put an e-locker in your rig. $150 obo
2f crank guaranteed good, been in my garage for five years and my POs garage for 20 before me. obo
https://forum.ih8mud.com/parting-out/569084-parting-out-couple-2f-engines.html
E-locker shaft for fzj80, short side, long splines, spare or use to put an e-locker in your rig. $150 obo
Last edited:
Some more stuff I have uncovered in the garage going up to Stockton:
4 early hubcaps (2 cutout, 2 uncut)
FJ45 interior light (complete)
early door frames (with glass) very good cond.
early switches
early grab bar
FJ45 window frame to top clamps
4 early hubcaps (2 cutout, 2 uncut)
FJ45 interior light (complete)
early door frames (with glass) very good cond.
early switches
early grab bar
FJ45 window frame to top clamps
I will have to stop by, the dome light and door frames sound like something I need to have a look at.
I've got a 5'x7' Conferr rack for sale on this thread - if I don't have a buyer before this weekend I'll be bringing it up with me.
I've also got a set of 4 265/75/R16 BFG AT's with only about 1,000 miles on them, mounted on black steel 6-lug Tundra rims that are currently on my rig but I'm looking to trade up to 285/75s or 255/85s if anyone has any interest.
Also have grey front carpet and tailgate carpet for an FJ60 - not in great shape but useable if anyone's interested. I'll let them go real cheap.
On the lookout for a few little things: couple of spare bolts for the front seats, a few screws for the plastic trim along the bottom of the doors, hi-lift jack and shovel mounts that will fit 1" steel tubing, battery tray, and 54mm hub socket.
~Adam
I've also got a set of 4 265/75/R16 BFG AT's with only about 1,000 miles on them, mounted on black steel 6-lug Tundra rims that are currently on my rig but I'm looking to trade up to 285/75s or 255/85s if anyone has any interest.
Also have grey front carpet and tailgate carpet for an FJ60 - not in great shape but useable if anyone's interested. I'll let them go real cheap.
On the lookout for a few little things: couple of spare bolts for the front seats, a few screws for the plastic trim along the bottom of the doors, hi-lift jack and shovel mounts that will fit 1" steel tubing, battery tray, and 54mm hub socket.
~Adam
I'll have
Running boards
Tire winch plate
Passenger side bumper wing with random brackets for rear bumper
Front kyb shocks stock height
Pointless hook
BIG ass lunette hook for trailer
Stock front and rear bump stops
Receiver hitch bike carrier
Random Yota switches
And anything else I find before Saturday
Running boards
Tire winch plate
Passenger side bumper wing with random brackets for rear bumper
Front kyb shocks stock height
Pointless hook
BIG ass lunette hook for trailer
Stock front and rear bump stops
Receiver hitch bike carrier
Random Yota switches
And anything else I find before Saturday
- Thread starter
- #78
Damn, can't make it.
Bgray, if you see this, your pm box is full.
Bgray, if you see this, your pm box is full.