TRim packers (1 Viewer)

[PKP80]

Tried a search and didn't come up with anything useful. Anyone w/ an OME 2.5 need to balance out any corners? Which corner/s 5mm or 10mm? I know every rig is different but I"d like to get an idea and see if there is a common theme. My guess is front passenger.

-SAm-

 

[T Y L E R]

I could be way off here , but I can't really remember a guy using single packers anywhere . If anything they'll use them to fight any stinkbug/nose down exaggeration on their 80 . In which case they all go up front .

If your lift is fairly new , ensure that , indeed , you have placed the coils on their respective sides ... if you have reversed them front , or even rear , you will note a slight lean to one side .


Good luck ,


TY

 

[PKP80]

Makes sense....what happend to the bouncing boobs?

 

[T Y L E R]

Makes sense....what happend to the bouncing boobs?

Take your truck out on a level asphalt surface , and measure from the ground to the bottom of the flare lip for equality , after ensuring all tires are equal psi . Let me know what your truck measures after that ..


I respectfully removed the boobage ... theres a thread somewhere in chat that explains it all .


TY

 

[Arya Ebrahimi]

TY, if he measures from the center of the wheel to the flare, it takes the tire's inflation and tread wear out of the equation......

 

[MTNRAT]

Longer springs go on the drivers side.
Cheers,
Sean

 

[concretejungle]

I got some spacers for the front on my medium lift to account for the stink-bug stance. I haven't put them in yet since i'm waiting to get an ARB bar and figure i'll put the spacers in when i get the bar. If you want i can give you the part # when i get home.

 

[PKP80]

I got some spacers for the front on my medium lift to account for the stink-bug stance. I haven't put them in yet since i'm waiting to get an ARB bar and figure i'll put the spacers in when i get the bar. If you want i can give you the part # when i get home.

Thanx concrete, but I already have what I need.

-Sam-

 

[PKP80]

I got some spacers for the front on my medium lift to account for the stink-bug stance. I haven't put them in yet since i'm waiting to get an ARB bar and figure i'll put the spacers in when i get the bar. If you want i can give you the part # when i get home.

Thanx concrete, but I already have what I need.

-Sam-