Tranny Cooler What Size?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 9, 2005
Threads
18
Messages
228
I need to put a tansmission cooler on my HJ61/12HT. I am leaning towards the TRUCOOL. What size lbs. did you use?

Thanx's
 
I saw this post before. Just wondering if over cooling would be an issue? Would the trucool would gaurd against this?
 
FJota said:
I saw this post before. Just wondering if over cooling would be an issue? Would the trucool would gaurd against this?

I asked this question when I was doing mine. Per Rodney, the LandCruiser transmission expert, you can't run the transmission too cool.

Mine runs almost 200 F, during the summer, on the highway, even with the big cooler. Keep in mind that I have a custom valve body in my transmission that keeps my torque converter locked up even when I drop into 3rd gear to pull a long hill. A stock valve body will not be maintaining torque converter lock up which means you will see even higher temps. Throw a heavy load in there and the problem is compounded. This winter I noticed that my transmission would still run up to about 180 on the coldest days.

I'd do a bigger one if I was going to do it over again.
 
Euclid that is what I was wondering about. Thanks for the info. :cool:

I hope to install the extreme valve body in the future.
Did it make a difference in your milage having the 3rd gear lockup?
 
Last edited:
No difference in mileage, but a big difference in driveablity. I no longer worry about droping into 3rd on long hills. I recently went to 33's all the time, and they are tollerable only because of the extreme VB and 3rd lockup.

I have one of Rodney's extreme transmissions as well, so it's hard to seperate the VB mod from the whole transmission but I'd say the whole deal is one of the best things I've ever done on my truck. I don't know anybody with the custom VB that doesn't love it.


FJota said:
Euclid that is what I was wondering about. Thanks for the info. :cool:

I hope to install the extreme valve body in the future.
Did it make a difference in your milage haveing the 3rd gear lockup?
 
Cool I had picked up a smaller one (4 " X 11 " X3 / 4) but will go exchange it for the BIGGER one.
Thanks
 

Users who are viewing this thread

Back
Top Bottom