Trail gear RHD High steer kit will fit Prado knuckles??

[pradocruzer]

Just wondering if any one knows if the Trail Gear RHD high steer kit will fit the Prado front knuckles. It seems like they should but don't know for sure. It dose look like it will interfere with the pan hard bar, but I will be relocating it anyways. I'am planing to 3 link the front with coilovers. Any info would be appreciated.
Thanks

 

[cody c]

Doesnt look like anybodys done it.

But... I believe they are the same ball as the mini truck/60 series.

If the arms dont hit the other linkages associated with the prado you should be fine, but the location of linkages and brackets would be a better question for you to answer.

One thought though, do you have e-locking hubs? Is there something different on the OEM knuckle for that or is it just the spindle thats different?

 

[pradocruzer]

Doesnt look like anybodys done it.

But... I believe they are the same ball as the mini truck/60 series.

If the arms dont hit the other linkages associated with the prado you should be fine, but the location of linkages and brackets would be a better question for you to answer.

One thought though, do you have e-locking hubs? Is there something different on the OEM knuckle for that or is it just the spindle thats different?

Hmmm I do have e locking hubs. I hope that doesn't make any difference. The linkages and brackets won't be a issue but I do know the panhard bar will be very close to hitting the high steer kit and they will not be on a level plane causing a ton of bump steer, meaning it needs to be re located.
There is a guy down the road with a mini truck. He might find it odd that I'am under his truck with a tape measure.
Thanks for the info and I will report back.
Take Care.