Trail Cuts & Maintenance (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

May 22nd? Isn't that the spring meeting/run date?
 
Hard choice isn't it!
 
That stinks, I would like to do both, oh well, gotta represent YT, meeting/run it is:bounce:
 
11/20/10 Easy/moderate cut at gretchens

11/20/10 Easy/moderate cut at gretchens
Redirect

Date: Saturday November 20th, 2010

Time: Meet at 9:00 am

Place: back field

Important Note: Stay off the main field and across from the bathhouse

Directions to Gretchen's

From Boston:
Take route I-93 north to exit 37 route 95/128 south. Take route 95/128 to exit 32 route 3 North.* Take route 3 north into New Hampshire. In New Hampshire take exit 7 route 101A west. Take 101A west to route 101 west, this will bypass the traffic of downtown Milford (if the route 101 west is missed 101A meets back with 101). Take 101 west to the intersection of 101 west and 101A east. This intersection has railroad tracks through it. Take a left turn onto 101 west. Take 101 west into Peterborough NH. In Peterborough
cross route 202 continuing on route 101 west into Dublin. In Dublin take a right onto route 137 north; at the corner is a gas station. Field and Forest is about 5 miles up on the right.

From South of Boston:
Take route I-95/128 north around Boston to exit 32 route 3 north. Continue with above directions at the *

From Northern New England:
Take Route I-93 to Route I-89 north to exit 5. Take route 202 south through Henniker, Hillsborough, Bennington. At the Bennington/Hancock town line take route 137 south. Follow through the Hancock center. Field and Forest will be on your left about 2 miles from the center.

From Western New England:
Conn.: Take I-91 north or I-84 north to the Mass Pike. Go east to Route 495. Take exit 11A to route I-495 north to exit 35 route 3 north. Continue with Boston directions at the *

Western Mass.: Take the Mass Pike east to exit 11A I-495 north to exit 35 route 3 North* OR Take route 2 to exit 19 route 202 north. Continue on route 202 north into New Hampshire into Peterborough to Junction of 101 and 202. Take a left onto 101 west to route 137 in Dublin. Take a right onto route 137 north; at the corner is a gas station. Field and Forest is about 5 miles up on the right.

Vermont: Take I-91 south to exit 3 route 9 east. Take route 9 east into Keene NH. Stay straight DO NOT TAKE ANY LEFT OR RIGHT TURNS! Route 9N, 10N, and 12N will go to your left. Go straight! Then 10 south will go to your right, again stay straight. Then 12A will be to your right and 101 east will be straight across. Go on route 101 east through Marlborough and into Dublin. In Dublin take a left onto route 137 north, Field and Forest will be about 5 miles up on your right.

Please bring gloves, chainsaw, clippers, your rig, lunch, and WATER.
 
Dave, I'm sure me asking this is getting old by now but, would an atv be ok for this trail work day, it's registered and all.
 
I don't have a chainsaw or clippers but would love to lend a hand! Also that link doesn't seem to work if you don't have a NEA login. Could someone PM me the details. thanks

-Brendan
 
Always need people to clear brush etc. from the trail.
 
Last edited:
That would be up to the trail cut leader, you should be able to contact him via the link in that post.

The link says: "The topic or post you requested does not exist"
 
Yeah, looks like if you don't have an NEA login you can't even see it, out of my control I'm afraid.

What I posted is ALL there is in the thread other then all the club delegates reporting they posted it in their respective groups.

I'll PM you Scott Dollard's email.
 
humm, I have been registered for a few years now!!!!! strange I still can.t see it???
 
I have yet to go to Gretchens, so I'm not familiar with the layout of the place; could one just park and walk to the areas that need work? TIA
 
Not going to be able to make this since I had previous plans. Are there any other trail Maint. dates scheduled?

Thanks
 
90% sure i'm going, anyone else?
 

Users who are viewing this thread

Back
Top Bottom