Torque Value for Fan Blade to Fluid Coupling Assembly? (1 Viewer)

[scrubolio]

During my radiator swap, I saw that my fan blade frame that connects the blade to the fluid coupling assembly was a bit rusted.

I opted to order a new fan blade but can't find the torque values for the 4 nuts on the FSM or here.

Anyone have an idea on the torque values? See nut circled in red below that connects fan blade to the fluid coupler studs.

I'd assume its 15 ft-lbs or less.

Thanks in advance!

 

[bloc]

I don't see a torque value either, but those are M6x1 and many other places on these vehicles have that hardware at around 80in-lbf. Sometimes 7ft-lbf, which works out to 84.

15ft-lbf is more along the lines of our M8 hardware, for the record.

 

[scrubolio]

appreciate it!

I don't see a torque value either, but those are M6x1 and many other places on these vehicles have that hardware at around 80in-lbf. Sometimes 7ft-lbf, which works out to 84.

15ft-lbf is more along the lines of our M8 hardware, for the record.