SOLD TN: Front Bench seats for '71-'72 FJ40

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Rainman

Wondering what my next vehicle will be...
Joined
May 25, 2013
Threads
112
Messages
2,187
Location
Nashville, Tennessee
These seats are in pretty dang good condition. Some animal did open an area and pack acorns for several winters. The last time these seats were used was 20 years ago. The truck and all parts have been indoors for all those years. I was the last to sit in the seats 20 years ago. These are from my re-purchase and I'm going a different rout in seating.

The back pans are in amazing condition. The bottom sheet metal is just as good on the driver's seat but moderately rusted on the bench side. Frames are good too. Asking $500 for the enchilada.

IMG_0163.jpeg

IMG_0164.jpeg

IMG_0165.jpeg

IMG_0166.jpeg

IMG_0167.jpeg
 
Last edited:
Annnnnd the last one.
IMG_0168.webp
 
GLWS!
 
Just for potential buyers, these are 1971 fj40 seats! Not correct for a 45! Not sure how they were mounted in your 45?
 
Thanks for the knowledge @whitey45 . These came in the back of the 45 when I got it back. I only drove the truck 2 times before I began to take it apart 2 decades ago so the seats may have been swapped. 20 years is a long time for my lousy memory. ( I actually did think the seats were salmon colored and was pleasantly surprised when they were tan. So there's that. )
 
My Dec of 1970 has these seats.
 
Learn something new every day.
 
Same seats in my 10/71 FJ40. And if any one has a decent back panel for the middle seat shoot me a message. I could use a better one!
 
Hey, Somebody make me an offer. I'm not just going to give them away but I'll take a serious offer. I know, it's a slim time frame but somebody needs 'em. I'm a fair negotiator.
 
Wow. Two sets of these. Same stinking' years too. What are the odds of that? I didn't purchase either of these. They both came with projects. Didn't match either one either. Wow.

I gotta get rid of these...
 
Anybody with a '71 or '72 needing better seats, these are a great find. Tell you what, I'll combine the two sets for a near perfect set with spares. The only thing bad for one set is the bottom sheet metal for the passenger 60% side. Rusted on one, missing on the other. Otherwise, a very solid set. Make me an offer for both sets.
 
I thought I posted the other set. Cramp! Wait! I posted the shots on a second thread. I'm reposting for clarity. The two threads were right next to each other the other day. Sorry...
I don't have the bottom to this set. It was used for customizing the rack for my last project. The material is near perfect on 3 of the 4 pieces. The door side of the driver's seat bottom is torn. That same section has some surface rust on the bottom. No cancer though. Could be cleaned up nicely.

Make me a decent offer.

IMG_0043.webp
IMG_0196.webp

IMG_0197.webp
IMG_0194.webp
 
@Bear73 chime in buddy, I'm getting offers right behind you for partials. I'm holding for your offer and the works. One guy want some small parts that are duplicated here. You may recoup a little money after the purchase.
 
I thought I posted the other set. Cramp! Wait! I posted the shots on a second thread. I'm reposting for clarity. The two threads were right next to each other the other day. Sorry...
I don't have the bottom to this set. It was used for customizing the rack for my last project. The material is near perfect on 3 of the 4 pieces. The door side of the driver's seat bottom is torn. That same section has some surface rust on the bottom. No cancer though. Could be cleaned up nicely.

Make me a decent offer.

View attachment 2233423View attachment 2233432
View attachment 2233451View attachment 2233459
These seats are in pretty dang good condition. Some animal did open an area and pack acorns for several winters. The last time these seats were used was 20 years ago. The truck and all parts have been indoors for all those years. I was the last to sit in the seats 20 years ago. These are from my re-purchase and I'm going a different rout in seating.

The back pans are in amazing condition. The bottom sheet metal is just as good on the driver's seat but moderately rusted on the bench side. Frames are good too. Asking $500 for the enchilada.

View attachment 2209948
View attachment 2209950
View attachment 2209951
View attachment 2209952
View attachment 2209953
Hello do you still have both your sets available or are they long gone? Tim
 
Good question Tim!

I bought the seats from Rainman back in March 2020 at the start of the whole covid mess. Needless to say it put a delay in our ability to coordinate delivery regardless of the fact I sent full payment via Venmo. If anyone knows how to reach Rainman, please help!

The last 2 messages in August of this year have gone unanswered. I'd really like to get my seats delivered...
 

Users who are viewing this thread

Back
Top Bottom