Tire rotation pics - What should I be concerned about? (Already posted about UCA) (1 Viewer)

[klimraamkosie]

Some tire rotation pictures. Not sure what's normal/not.

Left rear:

Front right

 

[klimraamkosie]

Front right:

Right rear

 

[klimraamkosie]

Front driver

 

[klimraamkosie]

Looks to me like the driver tie rod (replaced 10/2022) seal may have an issue again?

 

[r2m]

Truthfully, I'd look for a 5 star Yelp front end or alignment shop and have them do an assessment on it.
Preferably a shop that specializes in off road suspension and even better if they specialize in Toyota products only.

 

[re_guderian]

I'd slap the tires back on it and run it for another 6 months.

 

[klimraamkosie]

I'd slap the tires back on it and run it for another 6 months.

Already did a few river crossings.

Just trying to get more familiar on this end.

 

[LostLexus]

Everything looks like normal wear from the pictures. Time to hit the trail!

 

[ElliottB]

I don't see anything abnormal aside from actually using those bumpstops. Keep on sending!

 

[Acrad]

IMO: That stabilizer bar bushing could use a replacement

 

[klimraamkosie]

IMO: That stabilizer bar bushing could use a replacement

Yup noticed that right away, wasn't sure what it was. That's part of KDSS?

 

[Acrad]

Stabilizer bars are part of the KDSS system

You may want to look into some of the Dr KDSS products when replacing unless you want to stay completely stock

Front KDSS sway bar outer bushing

Sold in Pairs ( comes with grease and install instructions) Polyurethane ( harder /rigid) bushing for the front kdss sway bar ( outer bushing / kdss adapter) bushing. Deep knurling was designed into the inner part of the bushing to allow grease to hold better than all the other competitors...

drkdss.com

Kdss front sway bar billet clamps (pair)

Raw aluminum in stock … 2nd/3rd week of January 2023 for color options !! For 2010- 2022 4runner / GX460 with Kdss If you were to buy one product from me, the clamps would be the one to get This is by far the most important part(s) that I sell. Download Front Sway Bar Clamp Install PDF...

drkdss.com

Rear KDSS Sway bar billet clamps

sold in pairs. one pair is needed only for inside of rear kdss shock / hard link ! The purpose for these rear clamps is to get rid of the rubber straps that are glued on/ pressed on strap. The oem design eventually fails when you actively use your vehicle with and upgraded suspension. The...

drkdss.com

 

[re_guderian]

I thought everybody's KDSS business looked like that? Given the pressure generated by the system to function correctly, I can't see rubber bushing NOT deforming quickly. Having said that, I realize absolutely no negative ride implications for having bushings like that.

 

[Acrad]

I guess once you start hearing clunking or rattling

@Washingtontaco installed those billet clamps on his rig

Builds - 2018 Premium 460 build

Is Kaon offering those interior shelves/pockets now or is that from another vendor? Its all Kaon products.

forum.ih8mud.com

 

[Washingtontaco]

I guess once you start hearing clunking or rattling

@Washingtontaco installed those billet clamps on his rig

Builds - 2018 Premium 460 build

Is Kaon offering those interior shelves/pockets now or is that from another vendor? Its all Kaon products.

forum.ih8mud.com

They are holding well!

I will try out the stabilizer relocation brackets in a few months.

KDSS front sway bar end adapters

Adapters now only come in black!! Only for 2010 + 4runner / gx460 / prado 150 with kdss. NOT For gx470 Make your install even easier and have more adjustability . Click Here to Add FRONT KDSS SWAY BAR OUTER BUSHING please read below before purchasing !! ( sold as a pair ( driver and...

drkdss.com

Come to think of it I need to look at those rear stabilizer bushings to see if they are starting to squirt out.