For Sale SW WA - Method NV 17" wheels + LT265/70R17 BFG KO2s + Toytec lift spacers (1 Viewer)

Joined
Jan 16, 2010
Messages
456
Location
WA
Set of 4 Method 305 NV machined face wheels. 17" x 8.5", 6 x 5.5 / 139.7 lug pattern, 0mm offset / 4.75" BS. No damage at all and in great shape. Includes the unused center caps - wheels are 108mm center bore, and the caps act as hubcentric rings to 106.1mm Toyota/Lexus center bore.

Gorilla M12-1.50 extended shank tuner lug set, and Gorilla 108mm - 106.1mm hubcentric rings (for if you don't run center caps).

5 TPMS sensors, 4 were working and 1 was kinda not as of a year ago. I had disabled the system since.

4 regular rubber valve stems if you don't want TPMS.

Set of 4 BFG KO2 all terrain tires. C-rated LT265/70r17, 10-11/32" even wear so ~70% tread (15/32" when new).

One pair of Toytec aluminum 1/2" lift spacers, with extended studs, used but in good shape. Lifts the front suspension ~3/4" to level the truck and better fit larger tires and reduce rubbing. Fits 03+ 4runner, 03+ GX, 05+ Tacoma, and I think more. TOP1-T Front Top Plate Spacer Kit - https://www.toyteclifts.com/top1-t-front-top-plate-spacer-kit.html

I'm going to post this all up on Craigslist/Facebook for $1400, but I'll offer it here for $1200. This has been a great setup but I wanted to try a different size MT now that I'm changing suspension on my GX.

Located in southwest Washington, just north of Portland. Not able to offer shipping unless you arrange everything including pickup. Thanks!

PXL_20210515_213135761.jpg


PXL_20210524_180453046.jpg
 
Last edited:
Joined
Jan 16, 2010
Messages
456
Location
WA
And to show fitment with the Toytec spacers installed, here's a pic of my GX when everything was installed.

IMG_20200310_153959.jpg
 

Users who are viewing this thread

Top Bottom