Stupid T-100 MC question

[agent orange]

Im running a T-100 master cylinder in my 62, and im wondering if my perpetual brake pedal travel issues stem from me misrouting the brake lines. Just to make sure, the front brakes are routed to the front output on the MC and the rear brakes to the rear right? If memory serves me right the MC i bought was billed at a 94-98 part, its the one with both outputs on the drivers side of the MC. Thanks fellas.

Matt

 

[KliersLC]

Front brakes run off the front port. good luck.

Dan

 

[bkfj40]

You might need to adjust the pushrod length between the booster and the MC...are your rear brakes adjusted properly?

bk

 

[agent orange]

Ive checked the pushrod clearance, its fine. I think the problem is that i didnt turn my drums when i put new shoes on, so when i adjust the drums till they drag a little it just is knocking off the high spots and then in a couple weeks is out of adjustment again. I figure i can either keep on adjusting until they form to the shape of the drums or turn them and then do that. Thanks for letting me know i got he MC plumbed right.